Process Analytics and CEMS

Universal Gas Sampling Equipment

AMP SAMPLING PUMP

Gas Sampling Equipment

Analytical Sampling Pump
AMP416 16 Lpm
AMP057 7 Lpm
AMP26 5.5 Lpm
AMP11E 11 Lpm
Heated Sampling Pump
AMP500 30Lpm
Explosion proof
AMP416 16 Lpm
AMP057 7 Lpm

HEATED LINE

Gas Sampling Equipment

TEMPERATURE CONTROLLED

SELF LIMITED

Features

  • Fast connect
  • Multitube and internal cable
  • Pt100 or Thermocouple
  • AHL025 for portable application, highly flexible silicon or Polyamide braiding outer jacket
  • Corrugated PA12 UV resistant outer jacket
  • Terminated M40/M50 gland or standard hard cap

TEMPERATURE CONTROLLER

Gas Sampling Equipment

Features

  • In Rail and wall mount
  • Microprocessor based PID controller
  • Pt100 or Thermocouple
  • Relay contact rated up to 20A
  • Quick and easy to operate
  • 7pin/5pin Multipole plug output
  • Alarm output

CONDENSATES

Gas Sampling Equipment

Condensate Separator

Liquid Drain

Condensate Vessel

Liquid Alarm

Condensate Pump

Liquid Stop

FILTERS

Gas Sampling Equipment

Universal Filter

Fluid Particle Filter

Adsorption Filter

Panel Filter

Ambient Air Filter

Heated Filter

HUMIDIFIER and WASHBOTTLE

Gas Sampling Equipment

Humidifier

Washbottle

OTHERS

Gas Sampling Equipment

Flowmeter

Tubes

Ball Valve

Valve Manifold

Imperial Fitting

Check Valve

Mini Valve

Metric Fitting

Needle Valve

Gauge Root

SAMPLING SOLUTIONS

Sampling is the key factor to ensure representative analysis and essential to preserve the good status of your monitoring system.

AquaGas supplies stationary sampling equipment designed for Continuous Emission Monitoring (CEMS) and process online analysis.

Our solutions are available as system components for integration into a third party systems or as complete systems.

AquaGas integrated solutions combine the best technologies available to extract, transfer, and condition samples from stack or process gasses prior to analysis.

Our adaptative product range is versatile and suits a large field of applications.

CEMS product line

Sampling probe

Gas conditioner

Analyser

DAHS

Stack sampler

Calibrator and gas generators

PEMS product line

Portable sampling system

Portable analyser

System integration

As a system integration company AquaGas offers a large range of engineering services including product and systems design, project management and consulting.

PRODUCT DESIGN

Onsite services

AquaGas provides a comprehensive and flexible range of onsite services covering preventive and corrective maintenance, calibrations, data processing and reporting.

ONSITE

AHL – Heated Line

DN ID-OD (mm) DN4-6 DN6-8 DN8-10
Outside diameter of inner tube 6mm 8mm 10mm
Corrugated tube outside diameter 42.5mm (standard and ATEX) 42.5mm (standard and ATEX) 42.5mm (standard and ATEX)
Hard Caps outside diameter 47mm (standard and ATEX) 47mm (standard and ATEX) 47mm (standard and ATEX)
Power consumption at 200°C 100W per m 125W per m 125W per m
Power consumption at 250°C 125W per m 150W per m 150W per m
Lenght of connection stud 25mm 25mm 25mm
Min. bending radius 270mm 270mm 270mm
Max. lenght manufactured 46m 46m 46m
DN ID-OD (mm) DN4-6 DN6-8 DN8-10
Outside diameter of inner tube 6mm 8mm 10mm
Corrugated tube outside diameter 42.5mm (standard and ATEX) 42.5mm (standard and ATEX) 42.5mm (standard and ATEX)
Hard Caps outside diameter 47mm (standard and ATEX) 47mm (standard and ATEX) 47mm (standard and ATEX)
Power consumption at 40°C 9W per m 9W per m 9W per m
Power consumption at 80°C 46W per m 46W per m 46W per m
Power consumption at 120°C 63W per m 63W per m 63W per m
Lenght of connection stud 25mm 25mm 25mm
Min. bending radius 270mm 270mm 270mm
Max. lenght manufactured 78m 78m 78m

© Copyright - AquaGas Pty Ltd | ABN 46164822897. All Right Reserved