The ASI DM-100® CEM Dilution Module has been developed to meet the requirements of some of our more specialised applications, where our standard insitu dilution probe or a rather complex and expensive ex-situ (extractive) dilution system is simply not practical. Whether your primary diluting device is to be used as a stand-alone unit for laboratory applications, integrated within a heated filter system design for CEM Systems (thereby producing a basic ex-situ diluting sampler), or integrated into your ambient level gas analyzer for process monitoring… the DM-100® CEM Dilution Module is a great solution. Originally designed as a second stage diluting unit, downstream of an in-situ or ex situ dilution probe, the DM-100® CEM Dilution Module can also produce extremely high dilution ratios should your application call for it.
Can be used in hazardous areas; no steam or electrical service required (non-heated version)
Cost effective sampling solution for complex applications (multipoint CEMS, redundancy, long length of sample line…)
Standard dilution based CEM system (unheated) comply with ATEX standards
The low volume of sample extracted for the analysis prevent contamination of the sampling line and minimise dust buildup on filters