530® PID BTEX Analyser – Air Quality Monitoring

530® PID BTEX Analyser

Air Quality Monitoring

The 530® PID BTEX Analyser detector is a heated carbon rings atoms counter. The FID detector built-in to the 110® and 529® analyser series has here been replaced with the last generation of PID detectors in order to minimise the cost without compromising the accuracy. Electrical charges in the detector generated by UV light (PID) are proportional to carbon content in the sample. The electrical charges are collected by two polarised electrodes and converted by an electrical circuit into an electronic signal. The 530® PID BTEX gas chromatograph is intended for continuous monitoring of Benzene Toluene, Ethylbenzene and Xylene concentration in ambient and indoor air.

Brochure

530® Exclusive features – Measured Gases

Combination of GC and PID methods for Online monitoring of BTEX	Proprietary micro PID detector
Keyboard / LCD display interface for configuration & calibration	Built-in automatic ignition
Discrete gas sampling system (eductor)	LOW COST fully automatic standalone system for fast, accurate analysis of BTEX

GAS	FULL RANGE	LoD	ACCURACY
Benzene C6H6	0-100 µg/Nm3 / 0-500 µg/Nm3 / 0-1000 µg/Nm3 User programmable	0.1 µg/Nm3	0.5 µg/Nm3
Toluene C6H5-CH3	0-100 µg/Nm3 / 0-500 µg/Nm3 / 0-1000 µg/Nm3 User programmable	0.1 µg/Nm3	0.5 µg/Nm3 Benzene equiv.
Ethylbenzene C8H10 (C₆H₅CH₂CH₃)	0-100 µg/Nm3 / 0-500 µg/Nm3 / 0-1000 µg/Nm3 User programmable	0.1 µg/Nm3	0.5 µg/Nm3 Benzene equiv.
Xylene C8H10 ((CH₃)₂C₆H₄)	0-100 µg/Nm3 / 0-500 µg/Nm3 / 0-1000 µg/Nm3 User programmable	0.1 µg/Nm3	0.5 µg/Nm3 Benzene equiv.

The same technology can be adapted to specific VOCs air quality monitoring. The coupling of gas chromatography separation with state of the art FID detector allows accurate and reliable measurement of Benzene (C6H6), Ethylene (C2H4), Propylene (C3H6), Styrene (C8H8), Acetone (C3H6O), Formaldehyde (CH2O) and many others VOCs in ambient and indoor air.

530® BTEX Online Monitoring

Typical Applications

The 530® PID BTEX Analyser is typically designed for integration into Air Quality Monitoring Stations (AQMS) intended to measure continuously the concentration of Benzene Toluene, Ethylbenzene and Xylene. It also offers a large range of advantages for VOCs monitoring in indoor air within the frame of Occupational Health and Safety.

530® PID BTEX Analyser

530® Exclusive features – Measured Gases

530® BTEX Online Monitoring

Typical Applications

PCF user references

SERVICES & PRODUCTS ENQUIRIES

PRODUCTS

PARTNERS

APPLICATIONS