AquaGas Smart CEMS solution

 

AquaGas is excited to increase its range of smart sensors with the release of a new branded CEMS (Continuous Emissions Monitoring System) recently acquired through an OEM with MADUR (Poland) and available across Oceania: the MAMOS.

The MAMOS Smart CEMS is an online monitoring system designed by MADUR and integrated by AquaGas for the ANZ market which responds to industrials and environmental authorities today’s demand for a large range of industrial applications including small to large combustion plants (power station, paper mill, cement plant…), WTE (waste to Energy) installations as well as biogas, syngas and biomass generators .

Thanks to its modular and adaptive design the Mamos allows combining multiple sensors (PID, low and high range NDIR, Electrochemical, Thermal Conductivity) with applications specific sampling systems (Direct extractive heated and standard sampling train, Peltier cooler, Nafion membrane…). All system components are field replaceable and comes with a 24 months warranty.

Available as standalone unit, single analyser or redundant systems (fully backed up with manual and automatic redundancy) the Mamos smart CEMS is offered as a complete stationary CEMS for permanent installation or long term rental. AquaGas global service includes the various level of associated services (initial and final installation, commissioning, long term or punctual service agreement as well as the supply of consumables and critical spares for periods up to 5 years.

Moreover the MAMOS Smart CEMS ensures minimal investment and extremely low ownership costs for trouble free environmental monitoring and process control operations while complying with Australians states regulations.

Here are some of the MAMOS Smart CEMS main features:

  • Suited to complex gas matrix with accurate measurements of a large selection of gases: H2S, CO, CO2, HCl, SOx, NOx, H2, VOCs, CxHy, O2, NMHC and more.
  • Designed for harsh operating conditions with high dust load and elevated moisture content
  • Peltier, Nafion and standard sample conditioning sampling system
  • Builtin data logger
  • Reporting of normalised concentrations (mg/Nm3 or ppm) through analogue outputs, ModBus
  • Standalone and redundant systems with DAHS
  • Madcom acquisition and configuration software
  • In depth filtration with three stage particulates filtration (insitu with sequential backflush, heated filter, condensate trap and fine safety filter)
  • Full remote access
  • Multistream monitoring

 

TOPAZ Cerium – Rare Earth

Rare Earth

rare earth element (REE) or rare earth metal (REM) is one of a set of seventeen chemical elements in the periodic table, specifically the fifteen lanthanides, as well as scandium and yttrium. Scandium and yttrium are considered rare-earth elements because they tend to occur in the same ore deposits as the lanthanides and exhibit similar chemical properties.

Despite their name, rare-earth elements are relatively plentiful in Earth’s crust, with cerium being the 25th most abundant element at 68 parts per million, more abundant than copper. They are not especially rare, but they tend to occur together in nature and are difficult to separate from one another. However, because of their geochemical properties, rare-earth elements are typically dispersed and not often found concentrated as rare-earth minerals in economically exploitable ore deposits.

Uses of Rare Earth ElementsRare earth metals and alloys that contain them are used in many devices that people use every day such as computer memory, DVDs, rechargeable batteries, cell phones, catalytic converters, magnets, fluorescent lighting and much more.

Most of us use rare earth elements every day – without knowing it. These little-known and fascinating elements make modern electronics possible.

Mining Rare Earth

Rare Earth Minerals Processing. There are two major REE ore minerals from which predominantly LREE can be extracted with relative ease: bastnaesite and monazite. Bastnaesite, a fluorocarbonate mineral and monazite, a phosphate, contain predominantly either cerium, lanthanum or yttrium.

The run of mine material is passed through a cascade of physical processing steps including crushing, screening, grinding and flotation finally producing a bastnaesite pre-concentrate from which products with different REO contents are derived in subsequent thermal and chemical processing steps.  The REE mineral concentrate is digested in hydrochloric acid and the resulting REE laden liquor is passed through a sequence of solvent extraction with several mixer-settler steps. Final products of this element-selective extraction processes are either separated REO or other products following customer requirements.

Online Monitoring in Rare Earth Minerals Processing

The TOPAZ Rare Earth fulfils the requirements of the REE mining industry with the measurements of three key compounds:

Rare earths analyser

The online analysis of REE in condensate water, cooling tower and discharge water enables early leak detection along the mining process. Contaminated cooling water and condensate must be diverted and treated in WTP prior to be discharged. The TOPAZ Rare Earth from SERES Environment is specifically designed for to meet the REE industries in terms of environmental compliance and Process control.

Ammonium Bicarbonate analyser

Ammonium bicarbonate is used to precipitate the solution of cerium 4, the title of this solution, principally made from NH4 and CO2, determines the quality of the precipitate.  Accurate and fast monitoring of Ammonium Bicarbonate enables automated plant operations and optimal dosing.

Cerium analyser

Measurement of cerium 3 in cerium 4 for quality control and product categorisation depending on the specifications of the finished product.

AT THE HEART OF INNOVATION

SERES environnement is continually implicated in the process of technological innovation. “We constantly re-invest in research and development in order to provide our clients with the most advanced technologies. For SERES, the notion of change is a permanent challenge. We work in partnership and collaboration with French and foreign research centres (such as the CNRS – the French National Centre for Scientific Research), Engineering Colleges and Universities.” SERES environnement makes 60% of its turnover on the export market in more than 35 countries with references in the Oil & Gas, Water treatment, Cement and Glass industry, Energy and large manufacturing companies…

SERES Environnement References

 


AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

Integrated Systems and Customised Services

For better environmental performances.

  • ONLINE WATER ANALYSERS

    Ammonium, Free or Total Chlorine, Hydrazine, Morphine, Phenol, Sulfates, Colour, Silica, Phosphates (Orthophosphates), Hardness, Aluminium, Chromium VI, Iron, Nickel, Lead, Zinc, TH, Alkalinity, Chlorides, Cyanides, Fluorides, Peracetic acid VFA, CaM…

    SERES® online water quality analyser offers multiple sensor and method configurations. Here are the typical  measuring parameter calibrated on the TOPAZ unit. For other parameters or different measuring ranges (MR), please consult us.

  • EMISSIONS AND PROCESS GAS ANALYSERS

    NO, NO2, NOx, SO2, CO, HCl, CO2, H2O, H2S, NH3, N2O, COS, SO3, CH4, HF, HCN, H2…
    Our strong partnerships implemented with world leading CEMS and Process gas analyser manufacturers as well as local distributors,  provide AquaGas with an extensive range of technologies, diverse measuring principle and sampling methods to design and build cost effective, versatile and high performance systems composed of instruments specifically selected  in consideration of the applications.

  • DATA ACQUISITION AND REPORTING SOFTWARE

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

  • ISOKINETIC SAMPLING CONSOLE

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • PORTABLE GAS ANALYSERS

    O2, CO, CO2, NO, NO2, SO2, H2S, H2, CL2, N2O and VOCs

    Professional flue gas analyser combining high quality of sample conditioning with great measurement accuracy for continuous emissions monitoring or online process measurement of up to 9 gases simultaneously.

ENVIRONMENTAL MONITORING

A 550 Industrial Handheld Analyser

O2, CO, NO, NO2, NOx and SO2

Compact, robust and extremely accurate the A 550 INDUSTRIAL® is all that is required to perform a complete analysis and inspection of small, medium and large installation of combustion (kiln, burner, furnace…) and associated Gas Treatment Center. The A 550 INDUSTRIAL® is a handheld analyser designed to be used in tough industrial heat processes. With its stainless steel sintered insitu filter and built in Peltier cooler, the A550i fits the requirements of the most demanding applications especially when it comes to high moisture content and heavy dust loads.

Exclusive Features

CONSULT US FOR DEMO, RENTAL OR NEW UNITS

Wohler Measuring Instruments

Wohler analysers and testing instruments are a byword for quality and just what you need to analyse and test heating systems, flue gas systems, ventilation systems and buildings.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

 

NOx Emissions Testing

The emission of pollutants resulting from a multitude of activities (industry, transport, …) alters the atmospheric composition and degrade air quality. Control of gaseous pollutant emissions in the atmosphere has become a major challenge for the protection of human health and the environment. To avoid these risks, the regulation has established discharge limits thresholds for certain pollutants and requires periodic inspections whose frequency depends on the type of activity (from 3 months to 3 years). Accredited stack testing companies and/or Site Environmental Managers are responsible for conducting short to medium term environmental compliance monitoring tasks in a wide range of industries and processes such as power plants and large manufacturing facilities including paper mill, foundry, waste recycling facilities,  refineries…

NOx Portable Analysers

for Environmental Compliance in the power generation industry

Our customer, manufacturers and distributor of diesel, gas engines and power systems, has chosen AquaGas Monitoring Systems for the supply of handheld and portable NOx gas analysers. Convinced by the achieved performances, our client is using nowaday the GA12Plus and GA40TPlus gas analysers to ensure environmental compliance, combustion efficiency and optimal operating conditions of their small to large scale onsite power generators and associated filtration systems.

 

Each analyser comes with built in logger, NO, NO2 and O2 gas proprietary measuring cells, stack temperature sensor, flow and velocity measurement, advanced sampling systems, programmable monitoring sequences, wireless communications and deliver real time normalised (O2, Pressure and Temperature compensated, corrected on dry gas) concentrations with up to 18 hrs battery life.

The GA12 and GA40TPlus are multigas analysers and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

ENVIRONMENTAL MONITORING

Breathing Air Quality

Great Success with the AIRQUAL1

Breathing Air Quality Testing Kit

The AIRQUAL1 has been at the subject of numerous enquiries and multiple orders from various industries including but not limited to OH&S and certification organisms, air compressor companies, factories and workshops as well as scuba diving center. The AIRQUAL1 Breathing Air Quality Test Kit is designed to provide standalone compliance of AS 1715-2009 Appendix A & BS EN12021 legislation. This comprehensive breathing air quality test kit is compact, easy to operate and can be used to indicate the level of contamination, as well as, operating flow, temperature and pressure. On-The-Spot Measurement, sampling of compressed air is fast, with the ability to process results in less than 15 minutes. Concentrations of CO carbon monoxide, CO2 carbon dioxide, O2 oxygen and oil & mist can be determined almost instantly without further lab analysis. Pleasant to use, the AIRQUAL1 is a cost effective way to assess and certify on site your breathing air quality for the safety of your employees and collaborators.

CONSULT US TODAY FOR DEMO, RENTAL OR NEW UNITS

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

Flammable and toxic Offgas

Recent incidents have occurred in several open cut coal mines where flammable and toxic gases (NOx, SOx, CH4, CO, CO2 and H2S) have been found in areas where normal mining activities are being undertaken. Flammable and toxic gases have been found emitting from blast holes, post blast areas and strata, including spoil dumps and accumulating in the bottom of pits during temperature inversion events. Ignitions of methane have occurred during blasting operations and evidence of spontaneous combustion has been identified with the accompanying noxious gases. Methane gas has also been detected in product coal recovery tunnels, including in the cavity surrounding the coal chutes.

Hazards are evident when personnel and equipment operate in close proximity to these sources of flammable and toxic gases. Mine workers undertaking duties in and around the areas nominated should be made aware of the potential risks, their measurement and controls.

The following information may be useful in alerting mine workers in the characteristics of some the more commonly occurring gases found in open cut mines and their current recognised exposure standards.

With reference to the Coal Mining Safety and Health Regulation 2001 s142 Flammable or toxic gas, it is recommended that all open cut coal mine operators regularly review the mine Safety and Health Management System specifically related to the management of toxic and/or flammable gases on the mine site.

More specifically this review should focus on the effective implementation of the Standard Operating Procedure required under the Coal Mining Safety and Health Regulation 2001 s142.

PHOTON State of the Art Multigas Analyser

Monitoring flammable and toxic gases from open cut coal mines

Our client a large Australian Mining Company completed its mobile analysis laboratory with the acquisition of a PHOTON multigas analyser. The PHOTON belongs to Madur last generation of portable analysers designed for complex multigas applications and harsh process conditions. This PHOTON analyser is equipped with low resolution NDIR (Non Directive Infra Red) and Electrochemical measuring cells for short to medium term testing of Flammable and toxic gases CH4, CO, CO2, O2, H2S and SO2 in process and off gases from mine sites currently in operation and shutdown mine pits.

 

The  Photon is a multigas analyser and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

City Of Gold Coast

Committed to a better environment and sustainable future, AquaGas Pty Ltd is proud to assist the City of Gold Coast with the installation of a new gas monitoring system used to optimize the production of biogas as part of the government’s renewable energy target. Unlike natural gas derived from fossil fuels, Biogas is a mixture of gases produced by the fermentation process of fresh waste material in anaerobic (without air) conditions making biogas a renewable “natural gas” resource. With a complete monitoring system currently online, this new installation expands AquaGas references in the field of process control and environmental compliance at Biogas plant.

Biogas Monitoring Systems

for the City of Gold Coast

Biogas plants help to significantly reduce fugitive emissions of greenhouse gases and odour precursors while recovering energy for better process efficiency. There are multiple advantages in measuring biogas composition along the fermentation process and accurate online reading of CH4, H2S, CO2 and O2 have become our clients key factors in terms of plant operations and environmental compliance.

City of Gold Coast entrusted AquaGas Monitoring Systems for the supply, installation and commissioning of a biogas monitoring system ABYSS ABG as required to operate their three digesters each holding 27 ML, 15 ML and 15 ML each respectively. The turnkey and customised system delivered and commissioned by AquaGas enables safe plant operations, combustion efficiency and high reliability thanks to is a process sampling system with continuous liquid drain, dual stage pressure rated up to 10 bars, particulate filter, condensate trap and moisture alarm. At the heart of the system, the ABYSS ABG analyser from Ankersmid Sampling BVBA is fitted with high precision gas proprietary cells for simultaneous online measurements of CH4 content in % by NDIR (Non Dispersive Infra Red) and H2S traces down to 1 ppm (Electrochemical cell).

The ABYSS BIOGAS ABG and SYNGAS ASG Series are manufactured by Ankersmid Sampling BVBAANKERSMID® is well-known in the industry for more than 30 years now with subsidiaries in several countries (Netherlands, France, China, Romania, Germany, Korea etc.) and more than 100 employees world-wide assures ANKERSMID® in a leading position in the field of gas sampling and laboratory equipment. All products are designed and manufactured by ANKERSMID® Sampling Belgium including but not limited to gas sample probes, gas coolers, compact conditioning systems, NOx-converters as well as a complete range of universal gas sampling components. ANKERSMID® offering includes the most complete range of CEMS sampling system components and accessories completed with the versatile ABYSS series gas analysers. The modular and universal design of the CEMS components and accessories empowers cost effective, reliable and innovative system integration.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

Odour Control Systems

AquaGas Pty Ltd has been selected for the supply, installation, commissioning as well as long term servicing of two complete H2S monitoring systems used for emissions monitoring (CEMS) and process control at one of the most advanced  Odour Control System (OCS) currently under construction in NSW. This project provides AquaGas Pty Ltd with a new reference in OCS where accuracy and fast response time are fundamental in terms of environmental compliance and process automation.

Two Hydrogen Sulfide (H2S) Monitoring Systems

For the global leader in the packaging, paper and resource recovery industries

Our client, an engineering, procurement, construction management and technical consulting services for the Pulp & Paper, Recycling, Packaging and Waste to Energy industries has selected AquaGas Monitoring Systems to equip its new large scale Odour Control System with customised H2S online monitoring systems from Madur. Committed to a better environment and focused on sustainable technologies, AquaGas Monitoring Systems is extremely proud to be part of this project as this site becomes one of the most advanced waste recycling facilities in Australia, with zero effluent leaving the site. The two systems supplied are Mamos multigas analysers with heated sampling train, advanced gas conditioners, field replaceable measuring cells especifically integrated for online measurement upstream and downstream of GTC (Gas Treatment Centre) in OCS processes. The Mamos concept also offers advanced features for plant operators including but not limited built-in data logger, wide selection of IOs, Madcom realtime acquisition software, user programmable sampling sequences, automatic calibrations and self diagnosis.

More details on the Mamos analyser here: CEM and Process gas analyser.

The mamos is a multigas analyser and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

AquaGas Newsletter August 19

AquaGas Pty Ltd is delighted to announce the acquisition of several projects within the field of Emissions Monitoring (CEMS) and Process control

These new projects provide AquaGas with solid references for applications where accurate and reliable online analysis are fundamental in terms of environmental compliance and process automation.

Here is our pick

Two Biogas Monitoring Systems

For the global leader in the packaging, paper and resource recovery industries

Our client, an engineering, procurement, construction management and technical consulting services for the Pulp & Paper, Recycling, Packaging and Waste to Energy industries has selected AquaGas Monitoring Systems to equip its new biogas plant with customised H2S online monitoring systems ( Mamos multigas analysers ) from Madur. More details on the Mamos here: CEM and Process gas analyser

Biogas Monitoring Systems

for the City of Gold Coast

City of Gold Coast entrusted AquaGas Monitoring Systems for the supply, installation and commissioning of a biogas monitoring system ABYSS ABG as required to operate their three digesters each holding 27 ML, 15 ML and 15 ML each respectively.

Biogas plants help to significantly reduce fugitive emissions of greenhouse gases and odour precursors while recovering energy for better process efficiency. There are multiple advantages in measuring biogas composition along the fermentation process and accurate online reading of CH4, H2S, CO2 and O2 have become our clients key factors in terms of plant operations and environmental compliance.

PHOTON Portable Multigas Analyser

For monitoring flammable and toxic gases from open cut mines

Our client, a large Mining Company operating sites in Australia has completed its mobile analysis laboratory with the acquisition of a PHOTON multigas analyser. The PHOTON belongs to Madur last generation of portable analysers designed for complex multigas applications and harsh process conditions.

NOx Portable Analysers

for Environmental Compliance in the power generation industry

Our customer, manufacturers and distributor of diesel, gas engines and power systems, has chosen AquaGas Monitoring Systems for the supply of handheld and portable NOx gas analysers. Convinced by the achieved performances, our client is using nowaday the GA12Plus and GA40TPlus gas analysers to ensure environmental compliance, combustion efficiency and optimal operating conditions of their small to large scale onsite power generators and associated filtration systems.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

WT1 Fence Line Monitoring Solution

Fenceline Monitoring Solution for realtime mapping of physicals, chemicals and biologicals air pollutions.

MADE TO MEASURE” for the growing demand for flexible and affordable air pollution monitoring solutions, the WT1  is a multiparameter Fence Line Monitoring System easily deployable for smart cities mapping, roadside monitoring, air pollution and odours control at industrial sites, remediation sites as well as background air studies and environmental impact assessment. The WT1 Fence Line Monitoring System is designed by RUBIX Senses & Instrumentation for realtime measurement of air quality, noise, odours and vibrations in urban and rural area. 

Autonomous & Wireless, WT1® Watchtower fenceline monitoring system is designed for air pollution monitoring, environmental impact assessment and air quality control applications in urban and industrial areas. WT1® fenceline monitoring system consists in a network of field-based Gas & Odours monitoring stations with high precision sensors for low ppb gas concentrations in ambient air (H2S, RSH, NO2, NH3, SO2 …) in addition to VOC, odours, noise and particulates (from 0,3 to 17 µm). With its cutting edge cloud based data processing system (Rubix Soft SAS), the WT1® provides secured access from PC, Tablets or Phone to realtime reading, average, trends and  mapping of gas concentration with alarms and instrument status. The WT1® also offers key functions for odours surveys, plume prediction and air pollution impact assessment such as the ability to correlate high accuracy measurements in ppm, ppb or OU/M3 with sensory perception from multiple users (inspectors, surveyors or operators) and locations

WT1® fenceline monitoring system complies with

• Odour unit (EN 13725, ASTM E679)

• USEPA ( 40 CFR Part 53)

• EU ( 2008 /50/EC)

  • Scalable monitoring solution

    Modular and scalable, the WT1® fenceline monitoring system network is sized to your needs. Clear and accurate environmental data from Standalone analyser or sensors network  are available source by source, site by site or on a regional scale. Scalable instrument network for cities, large remediation sites, industrial areas, the WT1® fenceline monitoring system provides real-time air pollution data for efficient management of chemicals and olfactory pollution.

  • Realtime impact assessment

    Real Time alarm, customised mapping with online air pollution and nuisances data available from the RUBIX Soft SAS secured website, using any web browser to access safely your data, 24/7, anywhere in the world, the WT1 is a versatile tool for impact assessment and air pollution control in and around construction sites, industrial facilities.

  • Increased air pollution control capabilities

    Correlation with reference instruments can be provided via automatic on line sampling and dynamic olfactometry or field olfactometry and a simple correlation model building.

    Ideally suited to control biofilters, scrubbers and other odour control systems, WT1® fenceline monitoring system is typically designed to measure continuously the concentration of  a wide range of air pollutants and odour precursors including but not limited to  H2S, Mercaptans, Amines, NH2, SO2, CO2, CO, CL, C2HO4, H, HCl, HCN, NH3, O3, NO2, PH3, H2S, O2, SO2, CH4, NO, VOC, PM particles from 0,3 to 17 um.

  • Source identification

    Weather correlated AQM data with Temperature, Relative Humidity, wind speed and direction for Dynamic 3D mapping of dispersion plumes and automatic air pollution report with source identification in rural, industrial and urban areas.

AquaGas Pty Ltd

Integrated systems and Customised Services

aquagas_logo_500px

AquaGas Pty Ltd is committed to deliver turnkey monitoring solutions customised to today’s industrials needs

  • ONLINE WATER ANALYSERS

    Ammonium, Free or Total Chlorine, Hydrazine, Morphine, Phenol, Sulfates, Colour, Silica, Phosphates (Orthophosphates), Hardness, Aluminium, Chromium VI, Iron, Nickel, Lead, Zinc, TH, Alkalinity, Chlorides, Cyanides, Fluorides, Peracetic acid VFA, CaM…

    SERES® online water quality analyser offers multiple sensor and method configurations. Here are the typical  measuring parameter calibrated on the TOPAZ unit. For other parameters or different measuring ranges (MR), please consult us.

  • EMISSIONS AND PROCESS GAS ANALYSERS

    NO, NO2, NOx, SO2, CO, HCl, CO2, H2O, H2S, NH3, N2O, COS, SO3, CH4, HF, HCN, H2…
    Our strong partnerships implemented with world leading CEMS and Process gas analyser manufacturers as well as local distributors,  provide AquaGas with an extensive range of technologies, diverse measuring principle and sampling methods to design and build cost effective, versatile and high performance systems composed of instruments specifically selected  in consideration of the applications.

  • DATA ACQUISITION AND REPORTING SOFTWARE

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

  • ISOKINETIC SAMPLING CONSOLE

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • HANDHELD and PORTABLE GAS ANALYSERS

    O2, CO, CO2, NO, NO2, SO2, H2S, H2, CL2, N2O and VOCs

    Professional flue gas analyser combining high quality of sample conditioning with great measurement accuracy for continuous emissions monitoring or online process measurement of up to 9 gases simultaneously.