Posts

A 550 Industrial Handheld Analyser

O2, CO, NO, NO2, NOx and SO2

Compact, robust and extremely accurate the A 550 INDUSTRIAL® is all that is required to perform a complete analysis and inspection of small, medium and large installation of combustion (kiln, burner, furnace…) and associated Gas Treatment Center. The A 550 INDUSTRIAL® is a handheld analyser designed to be used in tough industrial heat processes. With its stainless steel sintered insitu filter and built in Peltier cooler, the A550i fits the requirements of the most demanding applications especially when it comes to high moisture content and heavy dust loads.

Exclusive Features

CONSULT US FOR DEMO, RENTAL OR NEW UNITS

Wohler Measuring Instruments

Wohler analysers and testing instruments are a byword for quality and just what you need to analyse and test heating systems, flue gas systems, ventilation systems and buildings.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

 

NOx Emissions Testing

The emission of pollutants resulting from a multitude of activities (industry, transport, …) alters the atmospheric composition and degrade air quality. Control of gaseous pollutant emissions in the atmosphere has become a major challenge for the protection of human health and the environment. To avoid these risks, the regulation has established discharge limits thresholds for certain pollutants and requires periodic inspections whose frequency depends on the type of activity (from 3 months to 3 years). Accredited stack testing companies and/or Site Environmental Managers are responsible for conducting short to medium term environmental compliance monitoring tasks in a wide range of industries and processes such as power plants and large manufacturing facilities including paper mill, foundry, waste recycling facilities,  refineries…

NOx Portable Analysers

for Environmental Compliance in the power generation industry

Our customer, manufacturers and distributor of diesel, gas engines and power systems, has chosen AquaGas Monitoring Systems for the supply of handheld and portable NOx gas analysers. Convinced by the achieved performances, our client is using nowaday the GA12Plus and GA40TPlus gas analysers to ensure environmental compliance, combustion efficiency and optimal operating conditions of their small to large scale onsite power generators and associated filtration systems.

 

Each analyser comes with built in logger, NO, NO2 and O2 gas proprietary measuring cells, stack temperature sensor, flow and velocity measurement, advanced sampling systems, programmable monitoring sequences, wireless communications and deliver real time normalised (O2, Pressure and Temperature compensated, corrected on dry gas) concentrations with up to 18 hrs battery life.

The GA12 and GA40TPlus are multigas analysers and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

Flammable and toxic Offgas

Recent incidents have occurred in several open cut coal mines where flammable and toxic gases (NOx, SOx, CH4, CO, CO2 and H2S) have been found in areas where normal mining activities are being undertaken. Flammable and toxic gases have been found emitting from blast holes, post blast areas and strata, including spoil dumps and accumulating in the bottom of pits during temperature inversion events. Ignitions of methane have occurred during blasting operations and evidence of spontaneous combustion has been identified with the accompanying noxious gases. Methane gas has also been detected in product coal recovery tunnels, including in the cavity surrounding the coal chutes.

Hazards are evident when personnel and equipment operate in close proximity to these sources of flammable and toxic gases. Mine workers undertaking duties in and around the areas nominated should be made aware of the potential risks, their measurement and controls.

The following information may be useful in alerting mine workers in the characteristics of some the more commonly occurring gases found in open cut mines and their current recognised exposure standards.

With reference to the Coal Mining Safety and Health Regulation 2001 s142 Flammable or toxic gas, it is recommended that all open cut coal mine operators regularly review the mine Safety and Health Management System specifically related to the management of toxic and/or flammable gases on the mine site.

More specifically this review should focus on the effective implementation of the Standard Operating Procedure required under the Coal Mining Safety and Health Regulation 2001 s142.

PHOTON State of the Art Multigas Analyser

Monitoring flammable and toxic gases from open cut coal mines

Our client a large Australian Mining Company completed its mobile analysis laboratory with the acquisition of a PHOTON multigas analyser. The PHOTON belongs to Madur last generation of portable analysers designed for complex multigas applications and harsh process conditions. This PHOTON analyser is equipped with low resolution NDIR (Non Directive Infra Red) and Electrochemical measuring cells for short to medium term testing of Flammable and toxic gases CH4, CO, CO2, O2, H2S and SO2 in process and off gases from mine sites currently in operation and shutdown mine pits.

 

The  Photon is a multigas analyser and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

WT1 Fence Line Monitoring Solution

Fenceline Monitoring Solution for realtime mapping of physicals, chemicals and biologicals air pollutions.

MADE TO MEASURE” for the growing demand for flexible and affordable air pollution monitoring solutions, the WT1  is a multiparameter Fence Line Monitoring System easily deployable for smart cities mapping, roadside monitoring, air pollution and odours control at industrial sites, remediation sites as well as background air studies and environmental impact assessment. The WT1 Fence Line Monitoring System is designed by RUBIX Senses & Instrumentation for realtime measurement of air quality, noise, odours and vibrations in urban and rural area. 

Autonomous & Wireless, WT1® Watchtower fenceline monitoring system is designed for air pollution monitoring, environmental impact assessment and air quality control applications in urban and industrial areas. WT1® fenceline monitoring system consists in a network of field-based Gas & Odours monitoring stations with high precision sensors for low ppb gas concentrations in ambient air (H2S, RSH, NO2, NH3, SO2 …) in addition to VOC, odours, noise and particulates (from 0,3 to 17 µm). With its cutting edge cloud based data processing system (Rubix Soft SAS), the WT1® provides secured access from PC, Tablets or Phone to realtime reading, average, trends and  mapping of gas concentration with alarms and instrument status. The WT1® also offers key functions for odours surveys, plume prediction and air pollution impact assessment such as the ability to correlate high accuracy measurements in ppm, ppb or OU/M3 with sensory perception from multiple users (inspectors, surveyors or operators) and locations

WT1® fenceline monitoring system complies with

• Odour unit (EN 13725, ASTM E679)

• USEPA ( 40 CFR Part 53)

• EU ( 2008 /50/EC)

  • Scalable monitoring solution

    Modular and scalable, the WT1® fenceline monitoring system network is sized to your needs. Clear and accurate environmental data from Standalone analyser or sensors network  are available source by source, site by site or on a regional scale. Scalable instrument network for cities, large remediation sites, industrial areas, the WT1® fenceline monitoring system provides real-time air pollution data for efficient management of chemicals and olfactory pollution.

  • Realtime impact assessment

    Real Time alarm, customised mapping with online air pollution and nuisances data available from the RUBIX Soft SAS secured website, using any web browser to access safely your data, 24/7, anywhere in the world, the WT1 is a versatile tool for impact assessment and air pollution control in and around construction sites, industrial facilities.

  • Increased air pollution control capabilities

    Correlation with reference instruments can be provided via automatic on line sampling and dynamic olfactometry or field olfactometry and a simple correlation model building.

    Ideally suited to control biofilters, scrubbers and other odour control systems, WT1® fenceline monitoring system is typically designed to measure continuously the concentration of  a wide range of air pollutants and odour precursors including but not limited to  H2S, Mercaptans, Amines, NH2, SO2, CO2, CO, CL, C2HO4, H, HCl, HCN, NH3, O3, NO2, PH3, H2S, O2, SO2, CH4, NO, VOC, PM particles from 0,3 to 17 um.

  • Source identification

    Weather correlated AQM data with Temperature, Relative Humidity, wind speed and direction for Dynamic 3D mapping of dispersion plumes and automatic air pollution report with source identification in rural, industrial and urban areas.

AquaGas Pty Ltd

Integrated systems and Customised Services

aquagas_logo_500px

AquaGas Pty Ltd is committed to deliver turnkey monitoring solutions customised to today’s industrials needs

  • ONLINE WATER ANALYSERS

    Ammonium, Free or Total Chlorine, Hydrazine, Morphine, Phenol, Sulfates, Colour, Silica, Phosphates (Orthophosphates), Hardness, Aluminium, Chromium VI, Iron, Nickel, Lead, Zinc, TH, Alkalinity, Chlorides, Cyanides, Fluorides, Peracetic acid VFA, CaM…

    SERES® online water quality analyser offers multiple sensor and method configurations. Here are the typical  measuring parameter calibrated on the TOPAZ unit. For other parameters or different measuring ranges (MR), please consult us.

  • EMISSIONS AND PROCESS GAS ANALYSERS

    NO, NO2, NOx, SO2, CO, HCl, CO2, H2O, H2S, NH3, N2O, COS, SO3, CH4, HF, HCN, H2…
    Our strong partnerships implemented with world leading CEMS and Process gas analyser manufacturers as well as local distributors,  provide AquaGas with an extensive range of technologies, diverse measuring principle and sampling methods to design and build cost effective, versatile and high performance systems composed of instruments specifically selected  in consideration of the applications.

  • DATA ACQUISITION AND REPORTING SOFTWARE

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

  • ISOKINETIC SAMPLING CONSOLE

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • HANDHELD and PORTABLE GAS ANALYSERS

    O2, CO, CO2, NO, NO2, SO2, H2S, H2, CL2, N2O and VOCs

    Professional flue gas analyser combining high quality of sample conditioning with great measurement accuracy for continuous emissions monitoring or online process measurement of up to 9 gases simultaneously.

Biogas Monitoring

Two Biogas Monitoring Systems

For a waste recycling facility in Victoria

AquaGas Pty Ltd has delivered two Biogas Monitoring Systems for H2S, O2 and CH4 online analysis at a biogas plant in Victoria. Our client, operator of 14 wastewater treatment plants and two ocean outfalls across Victoria, has selected the Mamos Biogas Analyser for its performances and reliability. The Mamos is specifically designed for online analysis of biogas primary constituents into process gas and emissions.

In addition to the numerous Mamos built-in functions, these systems offer application specific features implemented in collaboration with the plant operator.

Biogas plants are biological systems involving various interacting microorganisms that anaerobically degrade organic matter. The main product is biogas, a gas rich in methane (CH4) that can be used as a renewable fuel for vehicles or to generate heat or electricity for local use or for use via energy distribution grids.

aquagas_logo_500px

Integrated Systems and Customised Services

For better environmental performances.

  • ONLINE WATER ANALYSERS

    Ammonium, Free or Total Chlorine, Hydrazine, Morphine, Phenol, Sulfates, Colour, Silica, Phosphates (Orthophosphates), Hardness, Aluminium, Chromium VI, Iron, Nickel, Lead, Zinc, TH, Alkalinity, Chlorides, Cyanides, Fluorides, Peracetic acid VFA, CaM…

    SERES® online water quality analyser offers multiple sensor and method configurations. Here are the typical  measuring parameter calibrated on the TOPAZ unit. For other parameters or different measuring ranges (MR), please consult us.

  • EMISSIONS AND PROCESS GAS ANALYSERS

    NO, NO2, NOx, SO2, CO, HCl, CO2, H2O, H2S, NH3, N2O, COS, SO3, CH4, HF, HCN, H2…
    Our strong partnerships implemented with world leading CEMS and Process gas analyser manufacturers as well as local distributors,  provide AquaGas with an extensive range of technologies, diverse measuring principle and sampling methods to design and build cost effective, versatile and high performance systems composed of instruments specifically selected  in consideration of the applications.

  • DATA ACQUISITION AND REPORTING SOFTWARE

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

  • ISOKINETIC SAMPLING CONSOLE

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • PORTABLE GAS ANALYSERS

    O2, CO, CO2, NO, NO2, SO2, H2S, H2, CL2, N2O and VOCs

    Professional flue gas analyser combining high quality of sample conditioning with great measurement accuracy for continuous emissions monitoring or online process measurement of up to 9 gases simultaneously.