AquaGas Smart CEMS solution

 

AquaGas is excited to increase its range of smart sensors with the release of a new branded CEMS (Continuous Emissions Monitoring System) recently acquired through an OEM with MADUR (Poland) and available across Oceania: the MAMOS.

The MAMOS Smart CEMS is an online monitoring system designed by MADUR and integrated by AquaGas for the ANZ market which responds to industrials and environmental authorities today’s demand for a large range of industrial applications including small to large combustion plants (power station, paper mill, cement plant…), WTE (waste to Energy) installations as well as biogas, syngas and biomass generators .

Thanks to its modular and adaptive design the Mamos allows combining multiple sensors (PID, low and high range NDIR, Electrochemical, Thermal Conductivity) with applications specific sampling systems (Direct extractive heated and standard sampling train, Peltier cooler, Nafion membrane…). All system components are field replaceable and comes with a 24 months warranty.

Available as standalone unit, single analyser or redundant systems (fully backed up with manual and automatic redundancy) the Mamos smart CEMS is offered as a complete stationary CEMS for permanent installation or long term rental. AquaGas global service includes the various level of associated services (initial and final installation, commissioning, long term or punctual service agreement as well as the supply of consumables and critical spares for periods up to 5 years.

Moreover the MAMOS Smart CEMS ensures minimal investment and extremely low ownership costs for trouble free environmental monitoring and process control operations while complying with Australians states regulations.

Here are some of the MAMOS Smart CEMS main features:

  • Suited to complex gas matrix with accurate measurements of a large selection of gases: H2S, CO, CO2, HCl, SOx, NOx, H2, VOCs, CxHy, O2, NMHC and more.
  • Designed for harsh operating conditions with high dust load and elevated moisture content
  • Peltier, Nafion and standard sample conditioning sampling system
  • Builtin data logger
  • Reporting of normalised concentrations (mg/Nm3 or ppm) through analogue outputs, ModBus
  • Standalone and redundant systems with DAHS
  • Madcom acquisition and configuration software
  • In depth filtration with three stage particulates filtration (insitu with sequential backflush, heated filter, condensate trap and fine safety filter)
  • Full remote access
  • Multistream monitoring

 

A 550 Industrial Handheld Analyser

O2, CO, NO, NO2, NOx and SO2

Compact, robust and extremely accurate the A 550 INDUSTRIAL® is all that is required to perform a complete analysis and inspection of small, medium and large installation of combustion (kiln, burner, furnace…) and associated Gas Treatment Center. The A 550 INDUSTRIAL® is a handheld analyser designed to be used in tough industrial heat processes. With its stainless steel sintered insitu filter and built in Peltier cooler, the A550i fits the requirements of the most demanding applications especially when it comes to high moisture content and heavy dust loads.

Exclusive Features

CONSULT US FOR DEMO, RENTAL OR NEW UNITS

Wohler Measuring Instruments

Wohler analysers and testing instruments are a byword for quality and just what you need to analyse and test heating systems, flue gas systems, ventilation systems and buildings.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

 

Flammable and toxic Offgas

Recent incidents have occurred in several open cut coal mines where flammable and toxic gases (NOx, SOx, CH4, CO, CO2 and H2S) have been found in areas where normal mining activities are being undertaken. Flammable and toxic gases have been found emitting from blast holes, post blast areas and strata, including spoil dumps and accumulating in the bottom of pits during temperature inversion events. Ignitions of methane have occurred during blasting operations and evidence of spontaneous combustion has been identified with the accompanying noxious gases. Methane gas has also been detected in product coal recovery tunnels, including in the cavity surrounding the coal chutes.

Hazards are evident when personnel and equipment operate in close proximity to these sources of flammable and toxic gases. Mine workers undertaking duties in and around the areas nominated should be made aware of the potential risks, their measurement and controls.

The following information may be useful in alerting mine workers in the characteristics of some the more commonly occurring gases found in open cut mines and their current recognised exposure standards.

With reference to the Coal Mining Safety and Health Regulation 2001 s142 Flammable or toxic gas, it is recommended that all open cut coal mine operators regularly review the mine Safety and Health Management System specifically related to the management of toxic and/or flammable gases on the mine site.

More specifically this review should focus on the effective implementation of the Standard Operating Procedure required under the Coal Mining Safety and Health Regulation 2001 s142.

PHOTON State of the Art Multigas Analyser

Monitoring flammable and toxic gases from open cut coal mines

Our client a large Australian Mining Company completed its mobile analysis laboratory with the acquisition of a PHOTON multigas analyser. The PHOTON belongs to Madur last generation of portable analysers designed for complex multigas applications and harsh process conditions. This PHOTON analyser is equipped with low resolution NDIR (Non Directive Infra Red) and Electrochemical measuring cells for short to medium term testing of Flammable and toxic gases CH4, CO, CO2, O2, H2S and SO2 in process and off gases from mine sites currently in operation and shutdown mine pits.

 

The  Photon is a multigas analyser and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

AquaGas Pty Ltd – Enews – Projects

AquaGas Pty Ltd is proud to advertise the acquisition of several projects within the field of Emissions Monitoring (CEMS) and Water Quality (WQMS)

These new projects provide AquaGas with solid references for applications where accurate and reliable online analysis are fundamental in terms of environmental compliance and process automation.

Here is our pick

Three Water Quality Monitoring Stations

For Sydney’s greater remediation project

After having successfully completed the commissioning of the first set of systems supplied (Four CEMS NMHC), our client, South Pacific market leader for the containment and filtration of hydrocarbons (sheen, gasoline, diesel and oils), entrusted AquaGas Pty Ltd with the supply, installation and commissioning of three water quality monitoring stations for their Wastewater Treatment Plant.

Tank Headspace Monitoring Systems

for the Oil and Gas industry

A complete tank headspace gas monitoring system supplied to the Australian leading company in wastewater treatment. The AquaGas THMS is designed to be  integrated to the mainstream of the existing installation in order to enhance the management of wastewater. The THMS is used to alternatively measure the gas composition of two wastewater storage tank headspaces from our client main plant in Sydney.

CEM and Process Analysers

in Biogas Plant

Two Biogas Monitoring Systems for H2S, O2 and CH4 online analysis at a biogas plant in Victoria. Our client, operator of 14 wastewater treatment plants and two ocean outfalls across Victoria, has selected the Mamos Biogas Analyser for its performances and reliability. The Mamos is specifically designed for online analysis of biogas primary constituents into process gas and emissions.

Sterilant Gas

in manufacturing industry

The Australia’s leading manufacturers of disinfectants for healthcare, floor maintenance and industrial cleaning products has chosen the SafeCide™ for real-time measurement of Peracetic Acid PAA concentrations in parts per million (PPM) at their main production facilities in in the Hunter Region of New South Wales. The SafeCide™ gives employees peace of mind they are safe while minimizing disruptions to production related operations. SafeCide provides fast, accurate, real-time measurements of chemical vapor – giving you the ability to prevent or address concerns in real-time.

Complete Gas Detection and Monitoring Solutions

For Worker Safety, Quality, and Productivity

 

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING
ENVIRONMENTAL MONITORING

Stack Testing

Ankersmid Sampling

APS Portable Gas Sampling System

The emission of pollutants resulting from a multitude of activities (industry, transport, …) alters the atmospheric composition and degrade air quality. Control of gaseous pollutant emissions in the atmosphere has become a major challenge for the protection of human health and the environment. To avoid these risks, the regulation has established discharge limits thresholds for certain pollutants and requires periodic inspections whose frequency depends on the type of activity (from 3 months to 3 years). Accredited stack testing companies are responsible for conducting short to medium term environmental compliance monitoring tasks in a wide range of industries and processes such as power plants and large manufacturing facilities including paper mill, foundry, waste recycling facilities,  refineries…

Prior to be analysed, the gas extracted from the discharge stack or process duct requires delicate conditioning which mainly consist of particulate filtration and moisture removal. Failure to achieve an efficient sample preparation can results in inaccurate measurements, loss of data or damaged equipment.

While stack testers and local authorities are continuously devoting time and knowledge to optimise the methods and protocols related to short to medium terms mandatory analysis campaign, ANKERSMID® has invested its long time expertise in developing the APS Portable Gas Conditioning Systems in direct collaboration with  leading stack testing companies.

As a result, ANKERSMID® Portable Sampling System APS provides stack testers with  features tailored to short term source testing in a robust and light weight design. The complete systems responds to today’s demand in terms of operation and compliance.

ANKERSMID®

Portable Sampling System APS

ANKERSMID® Portable Sampling System APS is a complete gas sampling train composed of:

  • APP Heated Gas Sampling probe

    High temperature filtration

  • AHL Heated Gas Sample line

    Fast and reliable sample gas transfer

  • APS Gas Sampling System

    Accurate and performant gas conditioning

APP Portable Heated Gas Sampling Probe

The APP Heated Gas Sampling Probe is a light weight sampling gun enabling high temperature filtration directly at the sampling point.

Portable probe APP trans 2

The probe is heated up to 180°C in order to maintain the sample temperature above acid gases dew point. A filter element of 150 mm is integrated, suitable for most applications up to 1g of dust per cubic meter of emissions. Thanks to its design, the filter can be replaced or checked without the need of dismounting the probe. For applications where the dust load reaches 10 g/m³, a blow-back option can be fitted. Calibration gas can be injected directly into the probe through the calibration gas port according to emission monitoring standards enforcing test gas feeding via the probe’s filter element.

MAIN FEATURES

180°C operating temperature

Integrated over temperature safety switch

Low temperature alarm contact

Test gas port according to EN14181 available as standard

Light weight

Ready to operate in 15 minutes

Low and Easy maintenance

Universal mounting clamp for heated line

Compact design and universal applicability, easy handling with mounting eye on housing (2m chain incl.)

APP150 Portable heavy duty ABS case for safe transport

AHL Heated Sample Line

AHL Heatedline-v2

The AHL Heated sample line is perfectly suited to mobile applications. It features a highly flexible smooth silicon outer jacket and can be fitted with options enabling efficient installation and operation:

  • Quick connect fittings at both ends: stainless steel pressure release connector directly inserted into the heated lines hard cap terminations (no cold spot)
  • Built-in cable with plugs to feed the APP sampling probe with power – No additional cable or power source required at the sampling location.
  • Additional inner tubes for test gas (calibration via probe filter) or compressed air (back-flush)

APS Portable Gas Conditioning System

 

portable conditioning 3xx 2

The APS portable sampling system is designed so that detailed gas analysis can be carried out at any time in any place. The entire sampling system is housed in a compact and robust carrying case which ensures safe transport and easy set-up. All the components can be easily accessed for inspection or routine maintenance. The APS concept allows you to perform gas analysis in an efficient manner, safely and with a minimum of maintenance. This system ensures reliable sample preparation without loss and prevents damage on the downstream analysis system. It is suitable for a large range of applications and has already been adopted by many stack testers around the world.

MAIN FEATURES

Fully automated

Moisture alarm (detection of sample condensates)

Extremely stable dew point +/-1 degree C

Optimal reliability

Compact and robust design

Light weight

Ready to operate in 15 minutes

Low and Easy maintenance

PFA coated heat exchanger

PTFE coated sampling pump

Preliminary sample filter

Built-in temperature controller for the heated line

AquaGas Pty Ltd

Integrated high performance monitoring solutions

aquagas_logo_500px

AquaGas Pty Ltd has the tools and technologies needed to accurately measure atmospheric emissions of gaseous pollutants helping you in improving air quality and environmental performances.

  • Portable Gas Analysers

    Multigas analysers fitted with a combination of proprietary gas cells for short term monitoring of biogas, syngas and combustion processes.

  • Isokinetic Sampling Console

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • Data Acquisition and reporting Software

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

 

Ankersmid Sampling

ANKERSMID® , well-known in the monitoring industry as Ankersmid M&C, has the benefits of 30 years of experience in developing state of the art gas sampling and gas conditioning equipment tailored to CEMS (Continuous Emissions Monitoring Systems) and stack testing (short to medium term measurements). Subsidiaries in several countries (Netherlands, France, China, Roumania, Germany, Korea…) and more than 100 employees world-wide place ANKERSMID® in a leading position within the field of environmental monitoring and process control instrumentation.

CEMS and process gas analyser

 

A new approach to continuous gas monitoring

The Mamos is a high quality stationary monitoring system for the measurement of up to 6 gases as well as gas temperature, ambiant and differential pressures (Gas Flow) in a large field of applications.

Designed to optimise performance/price ratio, small in size and yet very skilful analyser, the Mamos is the field proven alternative for large, intricate Continuous Emissions Monitoring Systems, as it does not fall behind them concerning functionality, abilities, reliability and is far ahead in terms of expenses.

AquaGas Multigas CEMS

Online monitoring made easy

Fully automated and packed with exclusive features, the Mamos concept enlarges monitoring possibilities and respond to the today’s demands in terms of accuracy, reliability and flexibility. Each analyser is supplied with its own sampling system. The entire system is mounted on a wall mount plate and designed for installation in industrial settings and rough environment. It has a modular construction, and offer a large panel of add-ons to match site specific application requirements. The Mamos minimises the installation and ongoing operation cost until now required to fulfil your monitoring needs.

MAMOS-Multigas-analyser-CEMS-features

Multigas

Depending of the gas matrix and components to be analysed, the Mamos can be fitted with up to 6 different sensors. The combination of technologies (NDIR, TCD, PID, Electrochemical) and the addition of separate gas channels into the same instrument empower flexibility in multigas applications. A unique feature is to allocate a gas channel to sensible sensors. Its design ensures the cells have a limited exposure to gases and therefore extends considerably their respective life-time.

Process gas and emissions monitoring in combustion plants, boilers, syngas, biogas, waste recycling facilities and associated filtration systems are typical applications for multiple gas channels configuration.

In Biogas, the primary gas channel holds the CO2, CH4, Osensors while an additional separate gas channel is allocated to sensible Electrochemical sensors, H2S for example. The two NDIR gas channels can then be used for CO and VOCs.

MAMOS-CEMS-Flow diagram-2

The Mamos offers multiple sensor and method configurations. Here are the measuring parameter for the most common gases. For other gases or different measuring ranges (MR), please consult us.

 

Gas Analysis Method Range   I   Resolution Accuracy Time (T90) Conformity
O2

Oxygen

Electrochemical, Partial Pressure 20.95% |

0.01%

± 0.1% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
O2

Oxygen

Electrochemical, Partial Pressure 25.00% |

0.01%

± 0.1% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
O2

Oxygen

Electrochemical, Partial Pressure 100.00% |

0.01%

± 0.1% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical Sensor 4 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical, with H2 compensation 4 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical Sensor 20 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical, with H2 compensation 20 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical Sensor 10% |

0.001%

± 0.005% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

10% |

0.01%

± 0.05% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

25% |

0.01%

± 0.05% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

50% |

0.01%

± 0.05% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

100% |

0.1%

± 0.5% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

5% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

10% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

25% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

50% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

100% |

0.1%

± 0.5% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

1% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

5% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

10% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

25% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

50% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

100% |

0.1%

± 0.5% abs. or 5% rel. 45 sec
NO

Nitric Oxide

Electrochemical Sensor 1 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec CTM-022
NO

Nitric Oxide

Electrochemical Sensor 5 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec CTM-022
NO2

Nitrogen Dioxide

Electrochemical Sensor 1 000ppm |

1ppm

± 5ppm abs. or 5% rel. 60 sec CTM-022
NO2

Nitrogen Dioxide

Electrochemical Sensor 4 000ppm |

1ppm

± 5ppm abs. or 5% rel. 60 sec CTM-022
SO2

Sulphur Dioxide

Electrochemical Sensor 2 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec
SO2

Sulphur Dioxide

Electrochemical Sensor 5 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec
H2S

Hydrogen sulfide

Electrochemical Sensor 1 000ppm |

1ppm

± 5ppm abs. or 5% rel. 70 sec
H2S

Hydrogen sulfide

Electrochemical Sensor 10 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec
H2

Hydrogen

Electrochemical Sensor 2 000ppm |

1ppm

± 10ppm abs. or 5% rel. 50 sec
H2

Hydrogen

Electrochemical Sensor 20 000ppm |

1ppm

± 10ppm abs. or 5% rel. 70 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

10% |

0.1%

± 0.5% abs. or 5% rel 45 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

25% |

0.1%

± 0.5% abs. or 5% rel 45 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

50% |

0.1%

± 0.5% abs. or 5% rel 45 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

100% |

0.1%

± 0.5% abs. or 5% rel 45 sec
N2O

Nitrous Oxide

NDIR

Non Dispersive Infra Red

2 000ppm |

1ppm

± 10ppm abs. or 5% rel 45 sec ISO 21258
N2O

Nitrous Oxide

NDIR

Non Dispersive Infra Red

5 000ppm |

1ppm

± 10ppm abs. or 5% rel 45 sec ISO 21258
CHF3

Fluoroform (Refrigerant R23)

NDIR

Non Dispersive Infra Red

2.5% |

0.01%

± 0.05 abs. or 5% rel. 45 sec
CL2

Chlorine

Electrochemical Sensor 250ppm |

1ppm

± 5ppm abs. or 5% rel. 60 sec
VOC

Volatile Organic Compounds

PID

Photo Ionization Detector

100ppm |

1ppm

± 5ppm abs. or 5% rel. 120 sec Method 21
VOC

Volatile Organic Compounds

PID

Photo Ionization Detector

1000ppm |

1ppm

± 5ppm abs. or 5% rel. 120 sec Method 21

Pleasant interface

Its powerful and pleasant PC interface provides operators and system integrators with a broad range of settings to adjust many aspects of the measurement tasks such as automated sampling, calibration, purge sequences, analogue outputs behaviour, data presentations…

For large sites with complex monitoring requirements, the LAN and ModBus interfaces allow implementing in an efficient way large instruments networks with master/slave configurations and user settable monitoring functions.

MAMOS-CEMS-interface

Optimised integration

This compact system is delivered ready for installation. Thanks to its small size, the system is easy to locate,  install and set-up. The routing of the cables and tubes to the instrument is simplified with all gas and electrical connections grouped onto a single plate.

MAMOS-CEMS-Connector panel MAMOS-CEMS-Connector panel-2

Advanced Features

  • Miniature and field replaceable technology
  • Standard configuration includes 6 sensors (NDIR, TCD, PID or Electrochemical)
  • Measured gases: O2, CO, CO2, CxHy, NO, NO2, SO2, H2S, H2, N2O, Cl2, VOC
  • Built-in real-time calculations for the following process parameters:

 

Variable Method Range   I   Resolution Accuracy Response Time (T90)
Tgas

Gas temperature

K-type thermocouple -50 ÷ 1000°C |

0.1°C

± 2°C 10 sec
Tgas

Gas temperature

S-type thermocouple -50 ÷ 1000°C |

0.1°C

± 2°C 10 sec
Tamb

Boiler intake air temperature

PT500 resistive sensor -50 ÷ 1000°C |

0.1°C

± 2°C 10 sec
DP

Differential Pressure

Silicon piezo-resistive pressure sensor 25hPa ÷ +25hPa |

1Pa (0.01hPa)

± 2Pa abs. or 5% rel. 10 sec
V

Gas velocity

With sampling probe equipped Pitot tube & pressure sensor 1 ÷ 50m/s |

0.1m/s

0.3m/s abs. or 5% rel. 10 sec
Lambda λ

Excess air number

Calculated 1 ÷ 10 |

0.01

± 5% rel. 10 sec
qA

Stack loss

Calculated 0 ÷ 100% |

0.1%

± 5% rel 10 sec
Eta η

Combustion Efficiency

Calculated 0 ÷ 120% |

0.1%

± 5% rel 10 sec
  • Large display / User friendly menu
  • Built-in gas chiller with continuous condensate removal
  • Data-logger with SD card for results collection.
  • Analogue outputs (both current and voltage) to control external devices
  • User configurable functions controlled via digital and analogue inputs
  • USB, LAN, RS485 and MODBUS

Versatile in use

The sampling system configuration can be adapted to specific monitoring needs such as multipoint monitoring, redundancy, continuous or time set measuring cycles… When sampling from wet and hot gas, moisture content, condensates and salts are continuously removed by the use of one or several gas dryer(s) (Peltier or Nafion) equipped with built-in safety filter, condensate trap and safety inline particulate filters.

Wether it uses the built-in sampling pump or the pressure from the source, the analyser is designed to work with overpressure. Single gas channel configuration can handle overpressure up 1.8 bar.

MD3 for high moisture content – Waste incinerator, Syngas, Coal Power Stations, Chemical and refinery facilities, (…)

MAMOS-CEMS-MD3-Gas-Dryer

MD2 for low and medium moisture content – Biogas, landfill, odour filtration system, LNG, (…)

Three configurations

Compact – Short-extractive CEMS – Analyser with gas dryer on a common mounting plate, all installed near the measurement place.

MAMOS-CEMS-Compact Version

 

Dimensions (W x H x D) 240 mm x 360 mm x 160 mm
Weight (depends on equipment) 4 kg ÷ 5 kg
Casing’s material ABS
Protection grade IP 20
Mounting plate

dimensions (H x W) | material | weight

596 mm x 450 mm | aluminium | 1.9 kg
Operating conditions T: 10°C ÷ 50°C, RH: 5% ÷ 90% (non-condensing)
Storing temperature 0°C ÷ 55°C
Power consumption (analyser unit only) 30 W max
Data-logger: type | size | number of results SD flash card | max 4GB | practically unlimited
Display: type | parameters Backlit LCD | 20 characters x 4 lines
Gas pump: type | max gas flow | standard gas flow Diaphragm | max 2l/min | 1.5l/min (90l/h)
Maximal extraction point pressure: Atmospheric ±200hPa
Current analogue outputs 4 outputs 0mA ÷ 20mA or 4mA ÷ 20mA
Voltage analogue outputs 4 outputs 0V ÷ 5V or 0V ÷ 10V
Digital inputs 2 inputs, TTL levels, floating = high level
Digital outputs 1 open collector output + 2 SPDT relays (optional)
Computer communication interface B type USB socket

Split /1 dryer – Cold Dry Extractive CEMS – Analyser and gas dryer are installed on separate mounting plates, each equipped with its own power supply module.  The gas dryer is installed near the sampling point therefore the analyser can be located away from the source. Once free from water vapour, the sample can be conveyed on long distances without the need for heated lines.

MAMOS-CEMS-Split Version-2

Split/2 dryers – Cold Dry Extractive CEMS – Compact configuration with an additional gas dryer installed on separate mounting plates, each equipped with its own power supply module. Two dryers in serial for high drying performances suitable for Traces monitoring in wet sample.

MAMOS-CEMS-Split Version

Twin Split – Cold Dry Multipoint CEMS – This version is based on the Twin Split/1 dryer configuration, but uses two MD3 dryer with their own power supply added on  separate mounting plates enabling measurements from two different locations (each dryer is installed near the sampling point). User programmable sampling sequences.
Mamos - Mulitplexed CEMS

 

 

Madur, state-of-the-art monitoring solutions

logo

1300 850 862

Call us with your application details handy to organise a CEMS demo at your facilities !

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.