AquaGas Smart CEMS solution

 

AquaGas is excited to increase its range of smart sensors with the release of a new branded CEMS (Continuous Emissions Monitoring System) recently acquired through an OEM with MADUR (Poland) and available across Oceania: the MAMOS.

The MAMOS Smart CEMS is an online monitoring system designed by MADUR and integrated by AquaGas for the ANZ market which responds to industrials and environmental authorities today’s demand for a large range of industrial applications including small to large combustion plants (power station, paper mill, cement plant…), WTE (waste to Energy) installations as well as biogas, syngas and biomass generators .

Thanks to its modular and adaptive design the Mamos allows combining multiple sensors (PID, low and high range NDIR, Electrochemical, Thermal Conductivity) with applications specific sampling systems (Direct extractive heated and standard sampling train, Peltier cooler, Nafion membrane…). All system components are field replaceable and comes with a 24 months warranty.

Available as standalone unit, single analyser or redundant systems (fully backed up with manual and automatic redundancy) the Mamos smart CEMS is offered as a complete stationary CEMS for permanent installation or long term rental. AquaGas global service includes the various level of associated services (initial and final installation, commissioning, long term or punctual service agreement as well as the supply of consumables and critical spares for periods up to 5 years.

Moreover the MAMOS Smart CEMS ensures minimal investment and extremely low ownership costs for trouble free environmental monitoring and process control operations while complying with Australians states regulations.

Here are some of the MAMOS Smart CEMS main features:

  • Suited to complex gas matrix with accurate measurements of a large selection of gases: H2S, CO, CO2, HCl, SOx, NOx, H2, VOCs, CxHy, O2, NMHC and more.
  • Designed for harsh operating conditions with high dust load and elevated moisture content
  • Peltier, Nafion and standard sample conditioning sampling system
  • Builtin data logger
  • Reporting of normalised concentrations (mg/Nm3 or ppm) through analogue outputs, ModBus
  • Standalone and redundant systems with DAHS
  • Madcom acquisition and configuration software
  • In depth filtration with three stage particulates filtration (insitu with sequential backflush, heated filter, condensate trap and fine safety filter)
  • Full remote access
  • Multistream monitoring

 

A 550 Industrial Handheld Analyser

O2, CO, NO, NO2, NOx and SO2

Compact, robust and extremely accurate the A 550 INDUSTRIAL® is all that is required to perform a complete analysis and inspection of small, medium and large installation of combustion (kiln, burner, furnace…) and associated Gas Treatment Center. The A 550 INDUSTRIAL® is a handheld analyser designed to be used in tough industrial heat processes. With its stainless steel sintered insitu filter and built in Peltier cooler, the A550i fits the requirements of the most demanding applications especially when it comes to high moisture content and heavy dust loads.

Exclusive Features

CONSULT US FOR DEMO, RENTAL OR NEW UNITS

Wohler Measuring Instruments

Wohler analysers and testing instruments are a byword for quality and just what you need to analyse and test heating systems, flue gas systems, ventilation systems and buildings.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

 

Flammable and toxic Offgas

Recent incidents have occurred in several open cut coal mines where flammable and toxic gases (NOx, SOx, CH4, CO, CO2 and H2S) have been found in areas where normal mining activities are being undertaken. Flammable and toxic gases have been found emitting from blast holes, post blast areas and strata, including spoil dumps and accumulating in the bottom of pits during temperature inversion events. Ignitions of methane have occurred during blasting operations and evidence of spontaneous combustion has been identified with the accompanying noxious gases. Methane gas has also been detected in product coal recovery tunnels, including in the cavity surrounding the coal chutes.

Hazards are evident when personnel and equipment operate in close proximity to these sources of flammable and toxic gases. Mine workers undertaking duties in and around the areas nominated should be made aware of the potential risks, their measurement and controls.

The following information may be useful in alerting mine workers in the characteristics of some the more commonly occurring gases found in open cut mines and their current recognised exposure standards.

With reference to the Coal Mining Safety and Health Regulation 2001 s142 Flammable or toxic gas, it is recommended that all open cut coal mine operators regularly review the mine Safety and Health Management System specifically related to the management of toxic and/or flammable gases on the mine site.

More specifically this review should focus on the effective implementation of the Standard Operating Procedure required under the Coal Mining Safety and Health Regulation 2001 s142.

PHOTON State of the Art Multigas Analyser

Monitoring flammable and toxic gases from open cut coal mines

Our client a large Australian Mining Company completed its mobile analysis laboratory with the acquisition of a PHOTON multigas analyser. The PHOTON belongs to Madur last generation of portable analysers designed for complex multigas applications and harsh process conditions. This PHOTON analyser is equipped with low resolution NDIR (Non Directive Infra Red) and Electrochemical measuring cells for short to medium term testing of Flammable and toxic gases CH4, CO, CO2, O2, H2S and SO2 in process and off gases from mine sites currently in operation and shutdown mine pits.

 

The  Photon is a multigas analyser and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

City Of Gold Coast

Committed to a better environment and sustainable future, AquaGas Pty Ltd is proud to assist the City of Gold Coast with the installation of a new gas monitoring system used to optimize the production of biogas as part of the government’s renewable energy target. Unlike natural gas derived from fossil fuels, Biogas is a mixture of gases produced by the fermentation process of fresh waste material in anaerobic (without air) conditions making biogas a renewable “natural gas” resource. With a complete monitoring system currently online, this new installation expands AquaGas references in the field of process control and environmental compliance at Biogas plant.

Biogas Monitoring Systems

for the City of Gold Coast

Biogas plants help to significantly reduce fugitive emissions of greenhouse gases and odour precursors while recovering energy for better process efficiency. There are multiple advantages in measuring biogas composition along the fermentation process and accurate online reading of CH4, H2S, CO2 and O2 have become our clients key factors in terms of plant operations and environmental compliance.

City of Gold Coast entrusted AquaGas Monitoring Systems for the supply, installation and commissioning of a biogas monitoring system ABYSS ABG as required to operate their three digesters each holding 27 ML, 15 ML and 15 ML each respectively. The turnkey and customised system delivered and commissioned by AquaGas enables safe plant operations, combustion efficiency and high reliability thanks to is a process sampling system with continuous liquid drain, dual stage pressure rated up to 10 bars, particulate filter, condensate trap and moisture alarm. At the heart of the system, the ABYSS ABG analyser from Ankersmid Sampling BVBA is fitted with high precision gas proprietary cells for simultaneous online measurements of CH4 content in % by NDIR (Non Dispersive Infra Red) and H2S traces down to 1 ppm (Electrochemical cell).

The ABYSS BIOGAS ABG and SYNGAS ASG Series are manufactured by Ankersmid Sampling BVBAANKERSMID® is well-known in the industry for more than 30 years now with subsidiaries in several countries (Netherlands, France, China, Romania, Germany, Korea etc.) and more than 100 employees world-wide assures ANKERSMID® in a leading position in the field of gas sampling and laboratory equipment. All products are designed and manufactured by ANKERSMID® Sampling Belgium including but not limited to gas sample probes, gas coolers, compact conditioning systems, NOx-converters as well as a complete range of universal gas sampling components. ANKERSMID® offering includes the most complete range of CEMS sampling system components and accessories completed with the versatile ABYSS series gas analysers. The modular and universal design of the CEMS components and accessories empowers cost effective, reliable and innovative system integration.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

Odour Control Systems

AquaGas Pty Ltd has been selected for the supply, installation, commissioning as well as long term servicing of two complete H2S monitoring systems used for emissions monitoring (CEMS) and process control at one of the most advanced  Odour Control System (OCS) currently under construction in NSW. This project provides AquaGas Pty Ltd with a new reference in OCS where accuracy and fast response time are fundamental in terms of environmental compliance and process automation.

Two Hydrogen Sulfide (H2S) Monitoring Systems

For the global leader in the packaging, paper and resource recovery industries

Our client, an engineering, procurement, construction management and technical consulting services for the Pulp & Paper, Recycling, Packaging and Waste to Energy industries has selected AquaGas Monitoring Systems to equip its new large scale Odour Control System with customised H2S online monitoring systems from Madur. Committed to a better environment and focused on sustainable technologies, AquaGas Monitoring Systems is extremely proud to be part of this project as this site becomes one of the most advanced waste recycling facilities in Australia, with zero effluent leaving the site. The two systems supplied are Mamos multigas analysers with heated sampling train, advanced gas conditioners, field replaceable measuring cells especifically integrated for online measurement upstream and downstream of GTC (Gas Treatment Centre) in OCS processes. The Mamos concept also offers advanced features for plant operators including but not limited built-in data logger, wide selection of IOs, Madcom realtime acquisition software, user programmable sampling sequences, automatic calibrations and self diagnosis.

More details on the Mamos analyser here: CEM and Process gas analyser.

The mamos is a multigas analyser and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

AquaGas Pty Ltd – Enews – New Products – PID Analyzers

AquaGas Pty Ltd recently took over the technical and sales representation of PID Analyzers LLC (MA, USA) in Oceania. With more than 40,000 systems sold worldwide, PID Analyzers LLC offers performant and reliable solutions for a large panel of industrial and environmental applications. PID Analyzers LLC microprocessor based electronics is designed to control large range of gas proprietary sensors such as photoionization, flame ionization, thermal conductivity, flame photometry, infrared & amp; UV absorption, electrochemistry, capacitance…

Thus AquaGas complete its offer for Air Quality, Laboratory, Continuous Emissions Monitoring Systems and process control with a versatile and powerful technology perfectly suited to today’s industries, environmental agencies and laboratories requirements. PID Analyzers LLC Gas Chromatography based technology enables ultra low (ppt) to process level (%) online measurement of a broad range of chemicals in ambient air and industrial emissions especially for the key components Sulphur compounds and Mercury.

 

Zoom on the MC301

Sulphur Compounds Online Analysis

Ultra-Low level in Ambient air

The M301C® Gas Chromatograph analyser belongs to the fourth generation of GC developed by PID Analyzer LLC (USA) for online monitoring of wire range of gases including but not limited to Sulphur compounds (Mercaptans, COS, CS2, SO2, H2S, DMS, THT, EM, MM, DES…) in ambient (AQMS) and indoor air (OH&S).

 

 

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING

AquaGas Pty Ltd – Enews – Projects

AquaGas Pty Ltd is proud to advertise the acquisition of several projects within the field of Emissions Monitoring (CEMS) and Water Quality (WQMS)

These new projects provide AquaGas with solid references for applications where accurate and reliable online analysis are fundamental in terms of environmental compliance and process automation.

Here is our pick

Three Water Quality Monitoring Stations

For Sydney’s greater remediation project

After having successfully completed the commissioning of the first set of systems supplied (Four CEMS NMHC), our client, South Pacific market leader for the containment and filtration of hydrocarbons (sheen, gasoline, diesel and oils), entrusted AquaGas Pty Ltd with the supply, installation and commissioning of three water quality monitoring stations for their Wastewater Treatment Plant.

Tank Headspace Monitoring Systems

for the Oil and Gas industry

A complete tank headspace gas monitoring system supplied to the Australian leading company in wastewater treatment. The AquaGas THMS is designed to be  integrated to the mainstream of the existing installation in order to enhance the management of wastewater. The THMS is used to alternatively measure the gas composition of two wastewater storage tank headspaces from our client main plant in Sydney.

CEM and Process Analysers

in Biogas Plant

Two Biogas Monitoring Systems for H2S, O2 and CH4 online analysis at a biogas plant in Victoria. Our client, operator of 14 wastewater treatment plants and two ocean outfalls across Victoria, has selected the Mamos Biogas Analyser for its performances and reliability. The Mamos is specifically designed for online analysis of biogas primary constituents into process gas and emissions.

Sterilant Gas

in manufacturing industry

The Australia’s leading manufacturers of disinfectants for healthcare, floor maintenance and industrial cleaning products has chosen the SafeCide™ for real-time measurement of Peracetic Acid PAA concentrations in parts per million (PPM) at their main production facilities in in the Hunter Region of New South Wales. The SafeCide™ gives employees peace of mind they are safe while minimizing disruptions to production related operations. SafeCide provides fast, accurate, real-time measurements of chemical vapor – giving you the ability to prevent or address concerns in real-time.

Complete Gas Detection and Monitoring Solutions

For Worker Safety, Quality, and Productivity

 

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING
  • ENVIRONMENTAL MONITORING

Tank Headspace Monitoring Systems – THMS

Applications

in the Oil and Gas industry.

Water treatment plant in refineries and other oil and gas processes requires the use of tank for storage purposes and as part of the wastewater management plan. The composition of the air confined in the tank headspace provides a good indication of the level of contamination in the wastewater influents. Monitoring gas in tank headspaces also becomes mandatory when it comes to managing oils contaminated water. Explosion risks but also the corrosion and degradation factor are controlled with the blanketing whose automation can largely be optimised by the online measurement of gas concentrations in the headspace. Moreover there is a large number of compounds that will  adduce plant operators detailed information with regards to filtration and decantation processes.

Tank Blanketing Automation

Tank blanketing is the process of filling the headspace in storage vessels and reactors with an inert gas, usually to protect its contents from exploding, degrade but also to protect equipment from corrosion. As oxygen and moisture in the air can be undesired in numerous processes and applications, blanketing is done in a wide range of industries, varying from petrochemicals to food and beverage, pharmaceutical to pure water. Inerting is done for similar reasons but is not limited to storage tanks and reactors only. Any confined space can be sparged with an inert gas to create the desired atmosphere. This ranges from packing food under protective atmosphere to increase shelf life to lowering the oxygen concentration in rooms where welding takes place to reduce risk of fire.

Risks Management

Wrongly engineered or poorly maintained blanketing systems may lead to serious incidents, degraded plant operations and pollution events. A malfunctioning may cause the tank to implode or causes the leaking of air into the tank, which, as mentioned, can have consequences with regard to product quality and, depending on the stored product, can seriously increase risk of explosion.

One way to increase safety and reduce the use of blanketing gas (nitrogen, air…) simultaneously is to control inertisation as a function of gas concentration in the headspace. Depending on the product and the reason for blanketing and inerting, there are tolerances when it comes down to the maximum allowable oxygen, VOCs or other combustibles concentration. Certain monomers require zero percent oxygen to prevent polymerization. Others require a small amount of oxygen for the same reason. In the case of explosion protection, the oxygen concentration does not necessarily need to be zero. In fact for all solvents a so called limiting oxygen concentration exists. Below this concentration there is no risk of explosion. It is obvious that controlling the tank headspace purge based on the concentration will seriously cut nitrogen or other blanketing gas costs. Furthermore the measurement of gas concentrations in the tank headspace provides an important safety parameter.   Thresholds such as Limiting Oxygen Concentration (LOC), Maximum Oxygen Concentration (MOC), Lower Explosive Limit (LEL) indicate application and gas specific limits in terms of concentration.

For example, two threshold values are established for the oxygen concentration in the tank headspace, well below the Limiting Oxygen Concentration; the Lower Intervention Level and the Upper Intervention Level. These two threshold values are the set-points that control the purging sequences. The moment the oxygen concentration reaches the Lower Intervention Limit, the nitrogen flow is intermittent. Purging of the vessel is resumed when the upper intervention limit is exceeded. This means that the inerting system keeps the consumption of nitrogen minimal while safe operation is ensured.

Analyser solutions

Depending on individual process conditions and solvent; O2, H2O and LEL are usually the main parameters of interest. However when odour control is implemented NH3, H2S and VOCs can be added to the monitored parameters.

To meet the needs of the waste recycling facilities, AquaGas offers a unique fully automatic solution for realtime measurement of gas concentrations in Tank Headspaces. AquaGas THMS features the association of a MAMOS multigas analyser fitted with a combination of 9 gas proprietary measuring cells with a field proven, robust and dedicated Exproof sampling train. The system can be multiplexed for controlling up to 4 tank headspaces. Both the gas sampling probe located at the top of the tank and the sample line are temperature controlled above the gas dew point. Depending on the application, the gas can also be fitted with the optional backflush, temperature sensor, insitu filter… The onboard PLC offers a large panel of IOs as required to handle blanketing regulator, breathing valve, safety relief valve…

The THMS is integrated in Australia by AquaGas for continuous and simultaneous measurement of VOC, NH3, CO, CO2, LEL, CxHy, H2S and O2 inside tank headspaces.

Advantages of AquaGas THMS

The AquaGas THMS is a cost efficient and safe solution available in a compact wall mount IP56 enclosure that totally eliminates the need for multiple sensors and probes. The sampling probe can be mounted directly into the vessel or blanketing gas discharge piping and is rated for high dust, moisture or solvents loads. A retractable filter assembly allows cleaning of the sampling probe without the need for dismounting the probe from its matching flange. Zero calibration is performed automatically on a daily basis while span gas calibration is only required quarterly. In very critical applications, the system can be equipped with redundant probes and or sensors for additional safety and self check purposes. Compared to traditional analyser technology, the AquaGas THMS is available at only a fraction of the costs. The most valued perceived benefit however is the significant increase of safety, enormous savings on tank maintenance as well as the optimised process operations.

aquagas_logo_500px

Integrated Systems and Customised Services

For better environmental performances.

  • ONLINE WATER ANALYSERS

    Ammonium, Free or Total Chlorine, Hydrazine, Morphine, Phenol, Sulfates, Colour, Silica, Phosphates (Orthophosphates), Hardness, Aluminium, Chromium VI, Iron, Nickel, Lead, Zinc, TH, Alkalinity, Chlorides, Cyanides, Fluorides, Peracetic acid VFA, CaM…

    SERES® online water quality analyser offers multiple sensor and method configurations. Here are the typical  measuring parameter calibrated on the TOPAZ unit. For other parameters or different measuring ranges (MR), please consult us.

  • EMISSIONS AND PROCESS GAS ANALYSERS

    NO, NO2, NOx, SO2, CO, HCl, CO2, H2O, H2S, NH3, N2O, COS, SO3, CH4, HF, HCN, H2…
    Our strong partnerships implemented with world leading CEMS and Process gas analyser manufacturers as well as local distributors,  provide AquaGas with an extensive range of technologies, diverse measuring principle and sampling methods to design and build cost effective, versatile and high performance systems composed of instruments specifically selected  in consideration of the applications.

  • DATA ACQUISITION AND REPORTING SOFTWARE

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

  • ISOKINETIC SAMPLING CONSOLE

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • PORTABLE GAS ANALYSERS

    O2, CO, CO2, NO, NO2, SO2, H2S, H2, CL2, N2O and VOCs

    Professional flue gas analyser combining high quality of sample conditioning with great measurement accuracy for continuous emissions monitoring or online process measurement of up to 9 gases simultaneously.

AquaFID THC CEMS – Continuous Emissions Monitoring Systems

 

AquaGas supplies four FID CEMS AquaFID

For Sydney’s greater remediation project

AquaGas Monitoring Systems is proud to be part of a major remediation project taking place in the heart of Sydney’s next financial, tourist, cultural and entertainment precinct. This significantly large remediation project is now underway over the next three years to remediate on site 150,000 tonnes of contaminated fill material from a former gas plant.

One of the main actors in this project,  South Pacific market leader for the containment and filtration of hydrocarbons (sheen, gasoline, diesel and oils) and a range of other chemicals, has selected AquaGas Pty Ltd for the supply, installation and commissioning of the Continuous Emissions Monitoring Systems and Process Analysers at the remediation site.

To meet our client environmental monitoring requirements, AquaGas has offered a unique CEMS (Continuous Emissions Monitoring Systems) solution based on Gas Chromatography, the AquaFID. The AquaFID is a fully automatic THC CEMS integrated in Australia by AquaGas for continuous and simultaneous measurement of Total Hydrocarbons (THC), Non Methane Hydrocarbons (NMHC) and Methane (CH4).

The AquaFID key features includes the association of a field proven, robust fast loop heated sampling system from Ankersmid Sampling BVBA (Belgium) with a highly accurate M529H FID analysers from PCF (Italia).

The Exproof sampling system is fitted with extensive features such as calibration port as per international CEMS code and EN14181 for reliable continuous compliance monitoring. A combined H2 and Zero Air generator FID Station from Leman Instruments (France) ensures gas cylinders free operation for more safety and minimal site attendance.

The remediation projects are being strictly monitored in real time. Data is regularly reported to the EPA.

 

AquaGas Pty Ltd

Integrated systems and Customised Services

aquagas_logo_500px

AquaGas Pty Ltd has the tools and technologies needed to accurately measure atmospheric emissions of gaseous pollutants helping you in improving air quality and environmental performances.

  • Portable Gas Analysers

    Multigas analysers fitted with a combination of proprietary gas cells for short term monitoring of biogas, syngas and combustion processes.

  • Isokinetic Sampling Console

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • Data Acquisition and reporting Software

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

AquaGas Pty Ltd – Enews November 2016

We are delighted to announce the recent acquisition of several major projects in the field of Continuous Emissions Monitoring (CEMS) and industrial process control.

prony_energie

Continuous Emission Monitoring System

Prony Power Station in New Caledonia

AquaGas Pty Ltd, has been awarded a major contract for the supply, integration, installation and commissioning of two complete CEMS (Continuous Emission Monitoring System) used for compliance stack emissions monitoring of Prony Power Station located at one of the largest mining facilities located in southern hemisphere.

In this project, AquaGas has selected the LaserCEM (AP2E) and DR-320 R (DURAG) as the most suited technologies with regards to the application requirements and harsh monitoring conditions, providing the plant operator ENERCAL with the last generation of CEMS multigas analyser and dust monitors for online analysis of Particulates, HCl, SO2, NO, NO2, CO, CO2 and O2 at their two coal fired boiler facilities.

AquaGas scope also includes CDAS, Mcerts certified and state of the art data acquisition and reporting software suite. The CDAS software package ensures strict emissions reporting and clear environmental compliance.

The strong partnership with AP2E, expert in Laser Spectroscopy, and DURAG specialised in the field of environmental monitoring and process control has led to this first shared success, the acquisition of a capital reference for the LaserCEM in the field of power generation while enforcing AquaGas position in Oceania.

Prony Power Station is located on VALE mining site providing access to large port facilities for the supply of combustible. It consists of two 55 MW Alstom boilers (203 t/h – 87 bars – 515°C) equipped with Alstom turbines (85 bars – 500°C) and alternators (59 MVA – 11 kV) providing power for both the public demand and the needs of the large Nickel mining facilities.

Located close to the site and focused on customer satisfaction, AquaGas has implemented an efficient transfer of knowledge to the plant owner as well as to the local company ROBICAL assigned for the CEMS routine maintenance.

bn-hp826_0327ch_j_20150327044108

Continuous Emission Monitoring System

Caltex Lytton refinery in Australia

Caltex has recently approached AquaGas to perform a system expertise at their Lytton refining facilities near Brisbane.

The difficulties experienced by Caltex with their CEMS (Continuous Emission Monitoring System) had been related to the existing sampling method and resulted in a high maintenance level and unreliable monitoring operations.

Thanks to the customer feedback and following a couple of site visits, AquaGas has identified several ways to optimise the existing CEMS (Continuous Emission Monitoring System) sampling method. In order to secure the data availability and keep the maintenance requirements to their minimum, AquaGas Pty Ltd has supplied, integrated and installed a set of heated gas sampling probes:

  • ASP300

    At the boiler facilities, the ASP300 fitted with automatic blowback, calibration port in accordance with CEMS standards and a continuous soot removal system.

  • ASP400

    For the Thermal Oxidiser, the ASP400 equipped with automatic blowback, calibration port in accordance with CEMS standards and designed to handle high dust load as well as elevated process gas temperatures.

Both the ASP300 and ASP400 provide the plant operator with application specific features and innovative design resulting in a series of advantages:

  • Programmable back-flush sequences,
  • Calibration as per CEMS code,
  • Extended filtration surface,
  • Flue gas temperature measurement
  • Insitu filters – The ASP’s allows the inspection of the Insitu or “top filter” without the need for dismounting the probe (No fitters required for inspection or maintenance).
  • Adjustable temperature set point (set at 190 degree Celsius)
  • Continuous and automated soot removal performed directly at the sampling point

For further information on Ankersmid Gas Sampling probes, you can visit our website: www.aquagas.com.au.

Ankersmid Sampling

  • Universal

    CEMS integration made easy

  • Performant

    Field proven, high quality, durable Ankersmid Sampling BVBA patented designs

  • Modular

    Comprehensive range of gas sampling equipment from one source

  • Efficient

    Easy to install, maintain and operate

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.