AquaGas Smart CEMS solution


AquaGas is excited to increase its range of smart sensors with the release of a new branded CEMS (Continuous Emissions Monitoring System) recently acquired through an OEM with MADUR (Poland) and available across Oceania: the MAMOS.

The MAMOS Smart CEMS is an online monitoring system designed by MADUR and integrated by AquaGas for the ANZ market which responds to industrials and environmental authorities today’s demand for a large range of industrial applications including small to large combustion plants (power station, paper mill, cement plant…), WTE (waste to Energy) installations as well as biogas, syngas and biomass generators .

Thanks to its modular and adaptive design the Mamos allows combining multiple sensors (PID, low and high range NDIR, Electrochemical, Thermal Conductivity) with applications specific sampling systems (Direct extractive heated and standard sampling train, Peltier cooler, Nafion membrane…). All system components are field replaceable and comes with a 24 months warranty.

Available as standalone unit, single analyser or redundant systems (fully backed up with manual and automatic redundancy) the Mamos smart CEMS is offered as a complete stationary CEMS for permanent installation or long term rental. AquaGas global service includes the various level of associated services (initial and final installation, commissioning, long term or punctual service agreement as well as the supply of consumables and critical spares for periods up to 5 years.

Moreover the MAMOS Smart CEMS ensures minimal investment and extremely low ownership costs for trouble free environmental monitoring and process control operations while complying with Australians states regulations.

Here are some of the MAMOS Smart CEMS main features:

  • Suited to complex gas matrix with accurate measurements of a large selection of gases: H2S, CO, CO2, HCl, SOx, NOx, H2, VOCs, CxHy, O2, NMHC and more.
  • Designed for harsh operating conditions with high dust load and elevated moisture content
  • Peltier, Nafion and standard sample conditioning sampling system
  • Builtin data logger
  • Reporting of normalised concentrations (mg/Nm3 or ppm) through analogue outputs, ModBus
  • Standalone and redundant systems with DAHS
  • Madcom acquisition and configuration software
  • In depth filtration with three stage particulates filtration (insitu with sequential backflush, heated filter, condensate trap and fine safety filter)
  • Full remote access
  • Multistream monitoring


WT1 Fence Line Monitoring Solution

Fenceline Monitoring Solution for realtime mapping of physicals, chemicals and biologicals air pollutions.

MADE TO MEASURE” for the growing demand for flexible and affordable air pollution monitoring solutions, the WT1  is a multiparameter Fence Line Monitoring System easily deployable for smart cities mapping, roadside monitoring, air pollution and odours control at industrial sites, remediation sites as well as background air studies and environmental impact assessment. The WT1 Fence Line Monitoring System is designed by RUBIX Senses & Instrumentation for realtime measurement of air quality, noise, odours and vibrations in urban and rural area. 

Autonomous & Wireless, WT1® Watchtower fenceline monitoring system is designed for air pollution monitoring, environmental impact assessment and air quality control applications in urban and industrial areas. WT1® fenceline monitoring system consists in a network of field-based Gas & Odours monitoring stations with high precision sensors for low ppb gas concentrations in ambient air (H2S, RSH, NO2, NH3, SO2 …) in addition to VOC, odours, noise and particulates (from 0,3 to 17 µm). With its cutting edge cloud based data processing system (Rubix Soft SAS), the WT1® provides secured access from PC, Tablets or Phone to realtime reading, average, trends and  mapping of gas concentration with alarms and instrument status. The WT1® also offers key functions for odours surveys, plume prediction and air pollution impact assessment such as the ability to correlate high accuracy measurements in ppm, ppb or OU/M3 with sensory perception from multiple users (inspectors, surveyors or operators) and locations

WT1® fenceline monitoring system complies with

• Odour unit (EN 13725, ASTM E679)

• USEPA ( 40 CFR Part 53)

• EU ( 2008 /50/EC)

  • Scalable monitoring solution

    Modular and scalable, the WT1® fenceline monitoring system network is sized to your needs. Clear and accurate environmental data from Standalone analyser or sensors network  are available source by source, site by site or on a regional scale. Scalable instrument network for cities, large remediation sites, industrial areas, the WT1® fenceline monitoring system provides real-time air pollution data for efficient management of chemicals and olfactory pollution.

  • Realtime impact assessment

    Real Time alarm, customised mapping with online air pollution and nuisances data available from the RUBIX Soft SAS secured website, using any web browser to access safely your data, 24/7, anywhere in the world, the WT1 is a versatile tool for impact assessment and air pollution control in and around construction sites, industrial facilities.

  • Increased air pollution control capabilities

    Correlation with reference instruments can be provided via automatic on line sampling and dynamic olfactometry or field olfactometry and a simple correlation model building.

    Ideally suited to control biofilters, scrubbers and other odour control systems, WT1® fenceline monitoring system is typically designed to measure continuously the concentration of  a wide range of air pollutants and odour precursors including but not limited to  H2S, Mercaptans, Amines, NH2, SO2, CO2, CO, CL, C2HO4, H, HCl, HCN, NH3, O3, NO2, PH3, H2S, O2, SO2, CH4, NO, VOC, PM particles from 0,3 to 17 um.

  • Source identification

    Weather correlated AQM data with Temperature, Relative Humidity, wind speed and direction for Dynamic 3D mapping of dispersion plumes and automatic air pollution report with source identification in rural, industrial and urban areas.

AquaGas Pty Ltd

Integrated systems and Customised Services


AquaGas Pty Ltd is committed to deliver turnkey monitoring solutions customised to today’s industrials needs


    Ammonium, Free or Total Chlorine, Hydrazine, Morphine, Phenol, Sulfates, Colour, Silica, Phosphates (Orthophosphates), Hardness, Aluminium, Chromium VI, Iron, Nickel, Lead, Zinc, TH, Alkalinity, Chlorides, Cyanides, Fluorides, Peracetic acid VFA, CaM…

    SERES® online water quality analyser offers multiple sensor and method configurations. Here are the typical  measuring parameter calibrated on the TOPAZ unit. For other parameters or different measuring ranges (MR), please consult us.


    NO, NO2, NOx, SO2, CO, HCl, CO2, H2O, H2S, NH3, N2O, COS, SO3, CH4, HF, HCN, H2…
    Our strong partnerships implemented with world leading CEMS and Process gas analyser manufacturers as well as local distributors,  provide AquaGas with an extensive range of technologies, diverse measuring principle and sampling methods to design and build cost effective, versatile and high performance systems composed of instruments specifically selected  in consideration of the applications.


    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS


    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train


    O2, CO, CO2, NO, NO2, SO2, H2S, H2, CL2, N2O and VOCs

    Professional flue gas analyser combining high quality of sample conditioning with great measurement accuracy for continuous emissions monitoring or online process measurement of up to 9 gases simultaneously.