City Of Gold Coast

Committed to a better environment and sustainable future, AquaGas Pty Ltd is proud to assist the City of Gold Coast with the installation of a new gas monitoring system used to optimize the production of biogas as part of the government’s renewable energy target. Unlike natural gas derived from fossil fuels, Biogas is a mixture of gases produced by the fermentation process of fresh waste material in anaerobic (without air) conditions making biogas a renewable “natural gas” resource. With a complete monitoring system currently online, this new installation expands AquaGas references in the field of process control and environmental compliance at Biogas plant.

Biogas Monitoring Systems

for the City of Gold Coast

Biogas plants help to significantly reduce fugitive emissions of greenhouse gases and odour precursors while recovering energy for better process efficiency. There are multiple advantages in measuring biogas composition along the fermentation process and accurate online reading of CH4, H2S, CO2 and O2 have become our clients key factors in terms of plant operations and environmental compliance.

City of Gold Coast entrusted AquaGas Monitoring Systems for the supply, installation and commissioning of a biogas monitoring system ABYSS ABG as required to operate their three digesters each holding 27 ML, 15 ML and 15 ML each respectively. The turnkey and customised system delivered and commissioned by AquaGas enables safe plant operations, combustion efficiency and high reliability thanks to is a process sampling system with continuous liquid drain, dual stage pressure rated up to 10 bars, particulate filter, condensate trap and moisture alarm. At the heart of the system, the ABYSS ABG analyser from Ankersmid Sampling BVBA is fitted with high precision gas proprietary cells for simultaneous online measurements of CH4 content in % by NDIR (Non Dispersive Infra Red) and H2S traces down to 1 ppm (Electrochemical cell).

The ABYSS BIOGAS ABG and SYNGAS ASG Series are manufactured by Ankersmid Sampling BVBAANKERSMID® is well-known in the industry for more than 30 years now with subsidiaries in several countries (Netherlands, France, China, Romania, Germany, Korea etc.) and more than 100 employees world-wide assures ANKERSMID® in a leading position in the field of gas sampling and laboratory equipment. All products are designed and manufactured by ANKERSMID® Sampling Belgium including but not limited to gas sample probes, gas coolers, compact conditioning systems, NOx-converters as well as a complete range of universal gas sampling components. ANKERSMID® offering includes the most complete range of CEMS sampling system components and accessories completed with the versatile ABYSS series gas analysers. The modular and universal design of the CEMS components and accessories empowers cost effective, reliable and innovative system integration.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

Odour Control Systems

AquaGas Pty Ltd has been selected for the supply, installation, commissioning as well as long term servicing of two complete H2S monitoring systems used for emissions monitoring (CEMS) and process control at one of the most advanced  Odour Control System (OCS) currently under construction in NSW. This project provides AquaGas Pty Ltd with a new reference in OCS where accuracy and fast response time are fundamental in terms of environmental compliance and process automation.

Two Hydrogen Sulfide (H2S) Monitoring Systems

For the global leader in the packaging, paper and resource recovery industries

Our client, an engineering, procurement, construction management and technical consulting services for the Pulp & Paper, Recycling, Packaging and Waste to Energy industries has selected AquaGas Monitoring Systems to equip its new large scale Odour Control System with customised H2S online monitoring systems from Madur. Committed to a better environment and focused on sustainable technologies, AquaGas Monitoring Systems is extremely proud to be part of this project as this site becomes one of the most advanced waste recycling facilities in Australia, with zero effluent leaving the site. The two systems supplied are Mamos multigas analysers with heated sampling train, advanced gas conditioners, field replaceable measuring cells especifically integrated for online measurement upstream and downstream of GTC (Gas Treatment Centre) in OCS processes. The Mamos concept also offers advanced features for plant operators including but not limited built-in data logger, wide selection of IOs, Madcom realtime acquisition software, user programmable sampling sequences, automatic calibrations and self diagnosis.

More details on the Mamos analyser here: CEM and Process gas analyser.

The mamos is a multigas analyser and monitoring concept develop by Madur electronics. Madur was initially founded in 1984 in Vienna Austria and is now worldwide recognised manufacturer of reliable and cost effective equipment for gas analysis applications. Since 2013, Madur operates sales, production, service and R&D from their headquarters located in Poland to provide customers the most advanced solutions, the fastest possible with professional services and ongoing technical support.

MADE TO MEASURE

Environmental Monitoring and Process Control

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.

AquaFID THC CEMS – Continuous Emissions Monitoring Systems

 

AquaGas supplies four FID CEMS AquaFID

For Sydney’s greater remediation project

AquaGas Monitoring Systems is proud to be part of a major remediation project taking place in the heart of Sydney’s next financial, tourist, cultural and entertainment precinct. This significantly large remediation project is now underway over the next three years to remediate on site 150,000 tonnes of contaminated fill material from a former gas plant.

One of the main actors in this project,  South Pacific market leader for the containment and filtration of hydrocarbons (sheen, gasoline, diesel and oils) and a range of other chemicals, has selected AquaGas Pty Ltd for the supply, installation and commissioning of the Continuous Emissions Monitoring Systems and Process Analysers at the remediation site.

To meet our client environmental monitoring requirements, AquaGas has offered a unique CEMS (Continuous Emissions Monitoring Systems) solution based on Gas Chromatography, the AquaFID. The AquaFID is a fully automatic THC CEMS integrated in Australia by AquaGas for continuous and simultaneous measurement of Total Hydrocarbons (THC), Non Methane Hydrocarbons (NMHC) and Methane (CH4).

The AquaFID key features includes the association of a field proven, robust fast loop heated sampling system from Ankersmid Sampling BVBA (Belgium) with a highly accurate M529H FID analysers from PCF (Italia).

The Exproof sampling system is fitted with extensive features such as calibration port as per international CEMS code and EN14181 for reliable continuous compliance monitoring. A combined H2 and Zero Air generator FID Station from Leman Instruments (France) ensures gas cylinders free operation for more safety and minimal site attendance.

The remediation projects are being strictly monitored in real time. Data is regularly reported to the EPA.

 

AquaGas Pty Ltd

Integrated systems and Customised Services

aquagas_logo_500px

AquaGas Pty Ltd has the tools and technologies needed to accurately measure atmospheric emissions of gaseous pollutants helping you in improving air quality and environmental performances.

  • Portable Gas Analysers

    Multigas analysers fitted with a combination of proprietary gas cells for short term monitoring of biogas, syngas and combustion processes.

  • Isokinetic Sampling Console

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • Data Acquisition and reporting Software

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

ENVIRONMENTAL MONITORING

Stack Testing

Ankersmid Sampling

APS Portable Gas Sampling System

The emission of pollutants resulting from a multitude of activities (industry, transport, …) alters the atmospheric composition and degrade air quality. Control of gaseous pollutant emissions in the atmosphere has become a major challenge for the protection of human health and the environment. To avoid these risks, the regulation has established discharge limits thresholds for certain pollutants and requires periodic inspections whose frequency depends on the type of activity (from 3 months to 3 years). Accredited stack testing companies are responsible for conducting short to medium term environmental compliance monitoring tasks in a wide range of industries and processes such as power plants and large manufacturing facilities including paper mill, foundry, waste recycling facilities,  refineries…

Prior to be analysed, the gas extracted from the discharge stack or process duct requires delicate conditioning which mainly consist of particulate filtration and moisture removal. Failure to achieve an efficient sample preparation can results in inaccurate measurements, loss of data or damaged equipment.

While stack testers and local authorities are continuously devoting time and knowledge to optimise the methods and protocols related to short to medium terms mandatory analysis campaign, ANKERSMID® has invested its long time expertise in developing the APS Portable Gas Conditioning Systems in direct collaboration with  leading stack testing companies.

As a result, ANKERSMID® Portable Sampling System APS provides stack testers with  features tailored to short term source testing in a robust and light weight design. The complete systems responds to today’s demand in terms of operation and compliance.

ANKERSMID®

Portable Sampling System APS

ANKERSMID® Portable Sampling System APS is a complete gas sampling train composed of:

  • APP Heated Gas Sampling probe

    High temperature filtration

  • AHL Heated Gas Sample line

    Fast and reliable sample gas transfer

  • APS Gas Sampling System

    Accurate and performant gas conditioning

APP Portable Heated Gas Sampling Probe

The APP Heated Gas Sampling Probe is a light weight sampling gun enabling high temperature filtration directly at the sampling point.

Portable probe APP trans 2

The probe is heated up to 180°C in order to maintain the sample temperature above acid gases dew point. A filter element of 150 mm is integrated, suitable for most applications up to 1g of dust per cubic meter of emissions. Thanks to its design, the filter can be replaced or checked without the need of dismounting the probe. For applications where the dust load reaches 10 g/m³, a blow-back option can be fitted. Calibration gas can be injected directly into the probe through the calibration gas port according to emission monitoring standards enforcing test gas feeding via the probe’s filter element.

MAIN FEATURES

180°C operating temperature

Integrated over temperature safety switch

Low temperature alarm contact

Test gas port according to EN14181 available as standard

Light weight

Ready to operate in 15 minutes

Low and Easy maintenance

Universal mounting clamp for heated line

Compact design and universal applicability, easy handling with mounting eye on housing (2m chain incl.)

APP150 Portable heavy duty ABS case for safe transport

AHL Heated Sample Line

AHL Heatedline-v2

The AHL Heated sample line is perfectly suited to mobile applications. It features a highly flexible smooth silicon outer jacket and can be fitted with options enabling efficient installation and operation:

  • Quick connect fittings at both ends: stainless steel pressure release connector directly inserted into the heated lines hard cap terminations (no cold spot)
  • Built-in cable with plugs to feed the APP sampling probe with power – No additional cable or power source required at the sampling location.
  • Additional inner tubes for test gas (calibration via probe filter) or compressed air (back-flush)

APS Portable Gas Conditioning System

 

portable conditioning 3xx 2

The APS portable sampling system is designed so that detailed gas analysis can be carried out at any time in any place. The entire sampling system is housed in a compact and robust carrying case which ensures safe transport and easy set-up. All the components can be easily accessed for inspection or routine maintenance. The APS concept allows you to perform gas analysis in an efficient manner, safely and with a minimum of maintenance. This system ensures reliable sample preparation without loss and prevents damage on the downstream analysis system. It is suitable for a large range of applications and has already been adopted by many stack testers around the world.

MAIN FEATURES

Fully automated

Moisture alarm (detection of sample condensates)

Extremely stable dew point +/-1 degree C

Optimal reliability

Compact and robust design

Light weight

Ready to operate in 15 minutes

Low and Easy maintenance

PFA coated heat exchanger

PTFE coated sampling pump

Preliminary sample filter

Built-in temperature controller for the heated line

AquaGas Pty Ltd

Integrated high performance monitoring solutions

aquagas_logo_500px

AquaGas Pty Ltd has the tools and technologies needed to accurately measure atmospheric emissions of gaseous pollutants helping you in improving air quality and environmental performances.

  • Portable Gas Analysers

    Multigas analysers fitted with a combination of proprietary gas cells for short term monitoring of biogas, syngas and combustion processes.

  • Isokinetic Sampling Console

    Isokinetic sampler developed for short to medium term emissions monitoring, fulfilling all the requirements of the dioxins and persistent organic compounds (POPs), PCBs, metals, HCB and fine dust measurement standard within the same sampling train

  • Data Acquisition and reporting Software

    Data Aquisition Software (CDAS) is a fully MCERTS accredited (parts A, B, C1 & C2) real time data acquisition software – now available for touch screens and windows 10. CDAS is customisable and flexible, allowing it to collect raw data from a range of instruments for CEMS

 

Ankersmid Sampling

ANKERSMID® , well-known in the monitoring industry as Ankersmid M&C, has the benefits of 30 years of experience in developing state of the art gas sampling and gas conditioning equipment tailored to CEMS (Continuous Emissions Monitoring Systems) and stack testing (short to medium term measurements). Subsidiaries in several countries (Netherlands, France, China, Roumania, Germany, Korea…) and more than 100 employees world-wide place ANKERSMID® in a leading position within the field of environmental monitoring and process control instrumentation.

CEMS and process gas analyser

 

A new approach to continuous gas monitoring

The Mamos is a high quality stationary monitoring system for the measurement of up to 6 gases as well as gas temperature, ambiant and differential pressures (Gas Flow) in a large field of applications.

Designed to optimise performance/price ratio, small in size and yet very skilful analyser, the Mamos is the field proven alternative for large, intricate Continuous Emissions Monitoring Systems, as it does not fall behind them concerning functionality, abilities, reliability and is far ahead in terms of expenses.

AquaGas Multigas CEMS

Online monitoring made easy

Fully automated and packed with exclusive features, the Mamos concept enlarges monitoring possibilities and respond to the today’s demands in terms of accuracy, reliability and flexibility. Each analyser is supplied with its own sampling system. The entire system is mounted on a wall mount plate and designed for installation in industrial settings and rough environment. It has a modular construction, and offer a large panel of add-ons to match site specific application requirements. The Mamos minimises the installation and ongoing operation cost until now required to fulfil your monitoring needs.

MAMOS-Multigas-analyser-CEMS-features

Multigas

Depending of the gas matrix and components to be analysed, the Mamos can be fitted with up to 6 different sensors. The combination of technologies (NDIR, TCD, PID, Electrochemical) and the addition of separate gas channels into the same instrument empower flexibility in multigas applications. A unique feature is to allocate a gas channel to sensible sensors. Its design ensures the cells have a limited exposure to gases and therefore extends considerably their respective life-time.

Process gas and emissions monitoring in combustion plants, boilers, syngas, biogas, waste recycling facilities and associated filtration systems are typical applications for multiple gas channels configuration.

In Biogas, the primary gas channel holds the CO2, CH4, Osensors while an additional separate gas channel is allocated to sensible Electrochemical sensors, H2S for example. The two NDIR gas channels can then be used for CO and VOCs.

MAMOS-CEMS-Flow diagram-2

The Mamos offers multiple sensor and method configurations. Here are the measuring parameter for the most common gases. For other gases or different measuring ranges (MR), please consult us.

 

Gas Analysis Method Range   I   Resolution Accuracy Time (T90) Conformity
O2

Oxygen

Electrochemical, Partial Pressure 20.95% |

0.01%

± 0.1% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
O2

Oxygen

Electrochemical, Partial Pressure 25.00% |

0.01%

± 0.1% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
O2

Oxygen

Electrochemical, Partial Pressure 100.00% |

0.01%

± 0.1% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical Sensor 4 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical, with H2 compensation 4 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical Sensor 20 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical, with H2 compensation 20 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

Electrochemical Sensor 10% |

0.001%

± 0.005% abs. or 5% rel. 45 sec ISO 12039,
CTM-030
CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

10% |

0.01%

± 0.05% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

25% |

0.01%

± 0.05% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

50% |

0.01%

± 0.05% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO

Carbon Monoxide

NDIR

Non Dispersive Infra Red

100% |

0.1%

± 0.5% abs. or 5% rel. 45 sec EN 15058 and

Method 10

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

5% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

10% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

25% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

50% |

0.01%

± 0.05% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CO2

Carbon Dioxide

NDIR

Non Dispersive Infra Red

100% |

0.1%

± 0.5% abs. or 5% rel. 45 sec ISO 12039,

OTM-13

CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

1% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

5% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

10% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

25% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

50% |

0.01%

± 0.05% abs. or 5% rel. 45 sec
CxHy

Total Hydrocarbons

NDIR

Non Dispersive Infra Red

100% |

0.1%

± 0.5% abs. or 5% rel. 45 sec
NO

Nitric Oxide

Electrochemical Sensor 1 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec CTM-022
NO

Nitric Oxide

Electrochemical Sensor 5 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec CTM-022
NO2

Nitrogen Dioxide

Electrochemical Sensor 1 000ppm |

1ppm

± 5ppm abs. or 5% rel. 60 sec CTM-022
NO2

Nitrogen Dioxide

Electrochemical Sensor 4 000ppm |

1ppm

± 5ppm abs. or 5% rel. 60 sec CTM-022
SO2

Sulphur Dioxide

Electrochemical Sensor 2 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec
SO2

Sulphur Dioxide

Electrochemical Sensor 5 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec
H2S

Hydrogen sulfide

Electrochemical Sensor 1 000ppm |

1ppm

± 5ppm abs. or 5% rel. 70 sec
H2S

Hydrogen sulfide

Electrochemical Sensor 10 000ppm |

1ppm

± 5ppm abs. or 5% rel. 45 sec
H2

Hydrogen

Electrochemical Sensor 2 000ppm |

1ppm

± 10ppm abs. or 5% rel. 50 sec
H2

Hydrogen

Electrochemical Sensor 20 000ppm |

1ppm

± 10ppm abs. or 5% rel. 70 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

10% |

0.1%

± 0.5% abs. or 5% rel 45 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

25% |

0.1%

± 0.5% abs. or 5% rel 45 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

50% |

0.1%

± 0.5% abs. or 5% rel 45 sec
H2

Hydrogen

TCD

Thermal Conductivity Detector

100% |

0.1%

± 0.5% abs. or 5% rel 45 sec
N2O

Nitrous Oxide

NDIR

Non Dispersive Infra Red

2 000ppm |

1ppm

± 10ppm abs. or 5% rel 45 sec ISO 21258
N2O

Nitrous Oxide

NDIR

Non Dispersive Infra Red

5 000ppm |

1ppm

± 10ppm abs. or 5% rel 45 sec ISO 21258
CHF3

Fluoroform (Refrigerant R23)

NDIR

Non Dispersive Infra Red

2.5% |

0.01%

± 0.05 abs. or 5% rel. 45 sec
CL2

Chlorine

Electrochemical Sensor 250ppm |

1ppm

± 5ppm abs. or 5% rel. 60 sec
VOC

Volatile Organic Compounds

PID

Photo Ionization Detector

100ppm |

1ppm

± 5ppm abs. or 5% rel. 120 sec Method 21
VOC

Volatile Organic Compounds

PID

Photo Ionization Detector

1000ppm |

1ppm

± 5ppm abs. or 5% rel. 120 sec Method 21

Pleasant interface

Its powerful and pleasant PC interface provides operators and system integrators with a broad range of settings to adjust many aspects of the measurement tasks such as automated sampling, calibration, purge sequences, analogue outputs behaviour, data presentations…

For large sites with complex monitoring requirements, the LAN and ModBus interfaces allow implementing in an efficient way large instruments networks with master/slave configurations and user settable monitoring functions.

MAMOS-CEMS-interface

Optimised integration

This compact system is delivered ready for installation. Thanks to its small size, the system is easy to locate,  install and set-up. The routing of the cables and tubes to the instrument is simplified with all gas and electrical connections grouped onto a single plate.

MAMOS-CEMS-Connector panel MAMOS-CEMS-Connector panel-2

Advanced Features

  • Miniature and field replaceable technology
  • Standard configuration includes 6 sensors (NDIR, TCD, PID or Electrochemical)
  • Measured gases: O2, CO, CO2, CxHy, NO, NO2, SO2, H2S, H2, N2O, Cl2, VOC
  • Built-in real-time calculations for the following process parameters:

 

Variable Method Range   I   Resolution Accuracy Response Time (T90)
Tgas

Gas temperature

K-type thermocouple -50 ÷ 1000°C |

0.1°C

± 2°C 10 sec
Tgas

Gas temperature

S-type thermocouple -50 ÷ 1000°C |

0.1°C

± 2°C 10 sec
Tamb

Boiler intake air temperature

PT500 resistive sensor -50 ÷ 1000°C |

0.1°C

± 2°C 10 sec
DP

Differential Pressure

Silicon piezo-resistive pressure sensor 25hPa ÷ +25hPa |

1Pa (0.01hPa)

± 2Pa abs. or 5% rel. 10 sec
V

Gas velocity

With sampling probe equipped Pitot tube & pressure sensor 1 ÷ 50m/s |

0.1m/s

0.3m/s abs. or 5% rel. 10 sec
Lambda λ

Excess air number

Calculated 1 ÷ 10 |

0.01

± 5% rel. 10 sec
qA

Stack loss

Calculated 0 ÷ 100% |

0.1%

± 5% rel 10 sec
Eta η

Combustion Efficiency

Calculated 0 ÷ 120% |

0.1%

± 5% rel 10 sec
  • Large display / User friendly menu
  • Built-in gas chiller with continuous condensate removal
  • Data-logger with SD card for results collection.
  • Analogue outputs (both current and voltage) to control external devices
  • User configurable functions controlled via digital and analogue inputs
  • USB, LAN, RS485 and MODBUS

Versatile in use

The sampling system configuration can be adapted to specific monitoring needs such as multipoint monitoring, redundancy, continuous or time set measuring cycles… When sampling from wet and hot gas, moisture content, condensates and salts are continuously removed by the use of one or several gas dryer(s) (Peltier or Nafion) equipped with built-in safety filter, condensate trap and safety inline particulate filters.

Wether it uses the built-in sampling pump or the pressure from the source, the analyser is designed to work with overpressure. Single gas channel configuration can handle overpressure up 1.8 bar.

MD3 for high moisture content – Waste incinerator, Syngas, Coal Power Stations, Chemical and refinery facilities, (…)

MAMOS-CEMS-MD3-Gas-Dryer

MD2 for low and medium moisture content – Biogas, landfill, odour filtration system, LNG, (…)

Three configurations

Compact – Short-extractive CEMS – Analyser with gas dryer on a common mounting plate, all installed near the measurement place.

MAMOS-CEMS-Compact Version

 

Dimensions (W x H x D) 240 mm x 360 mm x 160 mm
Weight (depends on equipment) 4 kg ÷ 5 kg
Casing’s material ABS
Protection grade IP 20
Mounting plate

dimensions (H x W) | material | weight

596 mm x 450 mm | aluminium | 1.9 kg
Operating conditions T: 10°C ÷ 50°C, RH: 5% ÷ 90% (non-condensing)
Storing temperature 0°C ÷ 55°C
Power consumption (analyser unit only) 30 W max
Data-logger: type | size | number of results SD flash card | max 4GB | practically unlimited
Display: type | parameters Backlit LCD | 20 characters x 4 lines
Gas pump: type | max gas flow | standard gas flow Diaphragm | max 2l/min | 1.5l/min (90l/h)
Maximal extraction point pressure: Atmospheric ±200hPa
Current analogue outputs 4 outputs 0mA ÷ 20mA or 4mA ÷ 20mA
Voltage analogue outputs 4 outputs 0V ÷ 5V or 0V ÷ 10V
Digital inputs 2 inputs, TTL levels, floating = high level
Digital outputs 1 open collector output + 2 SPDT relays (optional)
Computer communication interface B type USB socket

Split /1 dryer – Cold Dry Extractive CEMS – Analyser and gas dryer are installed on separate mounting plates, each equipped with its own power supply module.  The gas dryer is installed near the sampling point therefore the analyser can be located away from the source. Once free from water vapour, the sample can be conveyed on long distances without the need for heated lines.

MAMOS-CEMS-Split Version-2

Split/2 dryers – Cold Dry Extractive CEMS – Compact configuration with an additional gas dryer installed on separate mounting plates, each equipped with its own power supply module. Two dryers in serial for high drying performances suitable for Traces monitoring in wet sample.

MAMOS-CEMS-Split Version

Twin Split – Cold Dry Multipoint CEMS – This version is based on the Twin Split/1 dryer configuration, but uses two MD3 dryer with their own power supply added on  separate mounting plates enabling measurements from two different locations (each dryer is installed near the sampling point). User programmable sampling sequences.
Mamos - Mulitplexed CEMS

 

 

Madur, state-of-the-art monitoring solutions

logo

1300 850 862

Call us with your application details handy to organise a CEMS demo at your facilities !

AquaGas is supporting the global industrial community with high performance environmental and process monitoring systems (Continuous Emissions Monitoring Systems, Air Quality Monitoring Systems, Online process analysers, Water Quality Monitoring Systems) specifically designed and built to meet your application requirements.